Samsung UN55D7000LFXZA Quick Guide (easy Manual) (ver.1.0) (English, French, S - Page 10
Connecting to an Antenna or Cable Connection - 55
View all Samsung UN55D7000LFXZA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Initial Pairing 1. When the user inserts batteries into the QWERTY Remote, "NEED PAIRING PRESS SYM+TAB" will be displayed on the screen. 2. Press the SYM and TAB buttons at the same time for more than 2 seconds. ✎✎The TV can be paired with only one QWERTY remote. Start the pairing process approximately 30 seconds after turning on the TV. ✎✎Keep within 20 inches(50 cm) between the QWERTY Remote and the TV. Performing the Pairing Process Again 1. If the QWERTY Remote has been paired before, press @ and ← on the QWERTY side for more than 3 seconds. "RESET OK" will be displayed on the LCD screen of the QWERTY remote. 2. Press MUTE, 0, MUTE and 0 on the remote side of the QWERTY Remote as it faces the TV. This sequence must be completed within 4 seconds. ✎✎There might be a slight delay between input and the response from the OSD. Do not wait for visual confirmation on the screen. 3. Follow the initial pairing process within 3 minutes. If the initial pairing process does not finish within 3 minutes, the whole process must be performed again. Connecting to an Antenna or Cable Connection Connecting the power cord and an antenna or cable connection VHF/UHF Antenna Cable ANT OUT Antenna Cable (Not Supplied) or ✎✎For the best cable connections to this product, be sure to use cables no thicker than 0.55 inches (14mm). xx Maximum thickness - 0.55 inches (14mm) English - 10