Samsung UN55EH6000F User Manual Ver.1.0 (English) - Page 1

Channel Menu

❑

Memorizing Channels

When you first set up your TV using

Plug & Play

, the TV memorized

the channels that were available over the air or through your cable

system and added them to the

Channel List

. The

Antenna

and

Auto program

functions described below let you re-run the channel

memorization function without having to re-run the

Plug & Play

procedure.

Antenna (Air / Cable)

Before your television can memorize the available channels, you

must select your TV's signal source,

Air

(using an antenna) or

Cable

.

Select Menu >

Channel

>

Antenna

>

Air

or

Cable

. After you have

selected the signal source, go on to the Auto Program function.

✎

Selecting the signal source using the

Antenna

function also

determines the signal source the TV is tuned to. For example,

if you receive your TV signal over the air, and you select

Cable

,

you will see only snow. You must select Air to see a picture.

Auto Program

The

Auto Program

function

memorizes all channels that are

available over the air or through your cable system and adds them to

the

Channel List

.

To start

Auto Program

, follow these steps:

1. Push

MENU

m

→

Channel

→

ENTER

E

on your remote. The

Antenna Source screen appears.

2. On the Antenna Source screen, select the source of your TV

signal.

Air

If your TV is connected to an antenna choose

Air

, and then press

ENTER

E

. The TV will automatically start memorizing channels.

Cable

If your TV is connected to a cable outlet, choose

Cable

, and then

press

ENTER

E

.

Go to Step 3.

Auto

If you choose

Auto

, and then press

ENTER

E

, the TV will

automatically select the correct Antenna source. Go to

Step 3.

3. On the Cable Type screen, use the

◄/►/▲/▼

buttons to select

the type of digital and analog cable systems you have:

STD

,

HRC

,

or

IRC.

Most systems are

STD

(Standard). When done, select

Start

, and then press

ENTER

E

. The TV will start memorizing

channels.

✎

Channel memorization can take up to 45 minutes, depending

on your cable system.

✎

Memorized channels are added to the

Added Channels

list. These are the channels you will see when you use the

Channel buttons on your remote.

Clear Scrambled Channel

This function filters out scrambled channels after

Auto Program

is

completed. This process may take up to 20~30 minutes.

✎

Press the

ENTER

E

button to stop the

Clear Scrambled

Channel

.

✎

This function is only available in

Cable

mode.

❑

Managing Channels

Channel List

See your list of Added channels, Favorite channels, or channels

you've scheduled for viewing. Add or delete Favorite channels, add

or delete channels from the Added Channels list, schedule channels

or programs for viewing. Watch a channel by selecting the channel

in the

All Channels, Added Channels

, or

Favorite

screen, pressing

the

▲

/

▼

buttons, and then pressing the

ENTER

E

button.

Added Channels

6

Air

6-1

♥ TV #6

7-1

♥ TV #7

8

Air

9

Air

9-1

♥ TV #9

10

Air

10-1

♥ TV #10

11-1

♥ TV #11

Air

'

Zoom

'

Select

T

Tools

► Next Program

Channel List Screens icons are listed on the left side. Select an

icon using the

▲/▼

buttons to view each list.

■

All Channels

: Shows all currently available channels includng

those you deleted from the

Added Channels

list.

■

Added Channels

: Shows all

Added channels

. These are the

channels that appear when you press the CH button.

■

*

Favorite

: Shows all favorite channels.

■

Programmed

: Shows all channels and programs currently

scheduled using

Timer Viewing

.

✎

Remote control buttons active on the

Channel List

screen.

x

Green (

Zoom

): Enlarges or shrinks a channel number.

x

Yellow (

Select

): Move the cursor to a channel. Press the Yellow

button to select the channel. A

c

mark appears. Repeat to select

additional channels. Then, open the Tools menu and apply a

function to the channels you selected.

x

T

(

Tools

): Displays the

Channel List

Tools

menu. (The

Tools

menus may differ depending on the situation.)

Display Icons Used in the Channel List Screens

Icons

Meaning

c

A selected channel.

*

A Favorite channel.

)

A reserved program.

(

A program currently being broadcast.

❑

The Channel List Tools Menu

t

The Channel List Tools menu contains most of the functions you

can use on the

All Channel

,

Added Channels

, and

Favorite

List

screens. To view, select a list screen, select a channel, and then

press the

TOOLS

button.

■

Add / Delete

: Delete a channel from or add a channel to the

Added Channels

list.

To delete channels from the

Added Channels

list, follow these steps:

1. Select one or more channels in the

Added Channels

list using

the

▲/▼

buttons and the Yellow Select button on your remote.

2. Press the

TOOLS

button on your remote. The Tools menu

appears

.

3. Select

Delete

in the Tools menu, and then press the

ENTER

E

button.

To add channels to the

Added Channels



All Channels

list using the

▲/▼


2. Press the

TOOLS


appears

.

3. Select

Add


ENTER

E

button.

✎

All deleted channels will be shown on the

All Channels

list.

You add channels back to the

Added Channels

list on the

All Channels

list.

✎

A gray-colored channel indicates the channel has been

deleted from the

Added Channels

list.

✎

The

Add

menu option only appears for deleted channels.

■

Add to Favorite/Delete from Favorite

: Lets you add channels

to and delete channels from your

Favorites

list.

To add channels to the

Favorites



All Channels

list using the

▲/▼


2. Press the

TOOLS


appears

.

3. Select

Add to Favorite


ENTER

E

button.

To delete channels from the

Favorites



Favorite

Channels list

using the

▲/▼

buttons and the Yellow Select button on your

remote.

2. Press the

TOOLS


appears.

3. Select

Delete from Favorite

in the Tools menu, and then

press the

ENTER

E

button.

■

Timer Viewing

: You can schedule a channel to be displayed

automatically at a set time, even when you are watching another

channel. You must set the current time first in the

Time

>

Clock

function to use

Time Viewing

.

To schedule a channel, follow these steps:

1. Select a channel in the

Added Channels

list using the

▲/▼


2. Press the

TOOLS


appears

.

3. Select

Time Viewing


ENTER

E

button. The Time Viewing screen appears.

Antenna

Channel

Repeat

▲

DTV Air

6-1

Once

▼

L

Move

U

Adjust

E

Enter

R

Return

Timer Viewing

Date

Start Time

01-01-2012

12 : 01 am

4. Use the

◄/►

buttons to move from entry field to entry field

and the

▲/▼

buttons to change the entries. Where numbers

are displayed, you can also enter numbers directly using the

number keypad on your remote.

✎

If you select

Everyday

or

Every Week

, the date you

select in the Date field becomes the start date for your

scheduled viewing. For

Everyday

, the TV will turn on

every day, at the time you selected, starting from that

date. For

Everyweek

, the TV will turn on every week,

on the same day of the week as the start date you

selected, at the time you selected, from that day on. If

you select

Once

, the TV will turn on once, on the date

and time you selected.

5. Press the

ENTER

E

button on your remote when done.

✎

Only

Added Channels

can be scheduled.

✎

Scheduled programs and channels are displayed in the

Programmed

List.

✎

When you select a digital channel, press the

►

button to

view the digital program list. If you highlight a program in

the list, and then press the

ENTER

E

(

Schedule

) button,

you set

Timer Viewing

for that program directly.

■

Select All

: Select all the channels in the displayed channel list.

■

Deselect All

: Deselect all the selected displayed channels.

✎

You can only select

Deselect All

when one or more

channels are selected.

■

Channel Name Edit

: Analog channels only. Lets you assign a

name of up to five characters to an analog channel. For example,

Hist, Food, Golf, etc. This makes it easier to find and select a

channel .

■

Auto Program

: See

Auto Program

under Memorizing Channels.

Programmed List (on the Channel List Screen)

The

Programmed

list displays the channels and programs you

have scheduled for viewing using the

Time Viewing

function. You

can view, modify, or delete a show you have scheduled using the

functions on the

Programmed

List screen Tools menu.

Programmed List Screen Tools Menu

t

■

Change Info

: Change the scheduling information for a show or

channel you have scheduled.

To change the information, follow these steps:

1. Select the

Programmed

List icon on the left side of the

Channel List

screen, and then press the

ENTER

E

button.

2. On the

Programmed

List screen, select the show or channel

entry you want to change, and then press the

TOOLS

button.

The Tools Menu appears.

3. Select

Change Info

, and then press the

ENTER

E

button.

The

Time Viewing

screen appears.

4. Use the

◄/►

buttons to move from entry field to entry field

and the

▲/▼

buttons to change the entries. Where numbers

are displayed, you can also enter numbers directly using the

number keypad on your remote.

5. Press the

ENTER

E

button when done.

■

Cancel Schedules

: Cancel a show or channel you have

scheduled.

To cancel a scheduled show or channel, follow these steps:

1. Select the

Programmed


Channel List


ENTER

E

button.

2. On the

Programmed


entry you want to cancel, and then press the

TOOLS

button.

The Tools Menu appears.

3. Select

Cancel Schedules


ENTER

E

button. The

Cancel Schedule

screen appears.

4. Select

OK


ENTER

E

button.

■

Information

: Display the information for a show or channel you

have scheduled. You can also change the schedule Information.

1. Select the

Programmed


Channel List


ENTER

E

button.

2. On the

Programmed


entry you want information for, and then press the

TOOLS

button. The Tools Menu appears.

3. Select

Information


ENTER

E

button.

The

Time Viewing

Information screen appears.

4. Select

Change Info

and press the

ENTER

E

button

to change information, or select

Close

and press the

ENTER

E

button to close the Information screen.

■

Select All / Deselect All

: You can select or deselect all

channels in the channel list.

❑

Other Channel Menu Functions

Channel Mode (Added Channels/Favorite

Channels)

Lets you select the channel list displayed when you press the

<

CH

>

(Channel) button on your remote. For example, if you

select Favorite Channels, you will only see Favorite channels when

you press the

<

CH

>

button.

Fine Tune

Analog channels only.

If the reception is clear, you do not have to fine tune the channel,

as this is done automatically during the search and store

operation. If the signal is weak or distorted, fine tune the channel

manually.

✎

Select the channel, and then select

Fine Tune

.

✎

Fine tuned channels that have been saved are marked with

an asterisk “*” on the right-hand side of the channel number

in the channel banner.

✎

To reset fine-tuning, select the channel, select

Fine Tune

, and

then select

Reset

on the

Fine Tune

screen.

Setup Menu

Plug & Play

Lets you re-run the

Plug & Play

initial setup procedure. For

instructions, see your Quick Start Guide.

Language

Set the menu language.

✎

Choose between

English

,

Español,

and

Français

.

❑

Setting the Time

Time

✎

The time you set will appear when you press the

INFO

button.

■

Clock

: Set the clock so you can use the various timer features

of the TV.

✎

If you disconnect the power cord, you have to set the

clock again.

To set the clock, follow these steps

:

1. Select

Setup

>

Time

>

Clock

.

2. Press

ENTER

E

and select

Auto

or

Manual

, and then press

ENTER

E

again.

If you selected Auto:

The TV will automatically download the correct time from a

digital channel.

• Select

Time Zone


ENTER

E

button.

Use the

▲/▼

buttons to select your

Time Zone

, and then

press

ENTER

E

.

•

Select DST (Daylight Savings Time), and then press

ENTER

E

. Select

On

if you want to turn the DST

adjustment on and off manually. Select

Off

to turn off the

DST adjustment. Select

Auto

if you want the TV to adjust

to DST automatically.

Press

ENTER

E

when done.

✎

DST

and

Time Zone

function are only available when

the

Clock Mode

is set to

Auto

.

If you selected Manual:

The

Clock Set

screen appears. Use the

▲/▼

buttons to

change the values in each field or use the number buttons to

enter the values directly. Use the

◄/►

buttons to move from

field to field. When done with all the fields, press

ENTER

E

.

✎

Available only when

Clock Mode

is set to

Manual

.

■

Sleep Timer

t

Automatically shuts off the TV after a preset period of time. (30,

60, 90, 120, 150 and 180 minutes).

✎

To cancel the

Sleep Timer

, select

Off

.

Timer 1 / Timer 2 / Timer 3

Turns the TV on and off automatically at times and days you

select. You can set three different on/off timer settings.

✎

You must set the clock first.

■

On Time / Off Time

: Set the hour, minute, am/pm, and

Activate/Inactivate fields for the

On Time

and

Off Time

. Use the

◄/►

buttons to move from field to field. Use the

▲/▼

buttons

to change the values in each field. To activate the timer with

the setting you have chosen, set the Activate/Inactivate field to

Activate

.

■

Volume

: Set the desired loudness.

■

Contents

: To select what will be turned on when the timer

setting is activated. You can set the TV to turn on a specific

channel or play back contents such as photo or audio files.

Use the

◄/►

buttons to move to move to the Contents field,

and then press the

ENTER

E

button. The Contents screen

appears. Use the

◄/►

buttons to move from field to field. Use

the

▲/▼

buttons to change the values in each field.

- TV/USB

: Select

TV

or

USB

. The USB device must be

connected to your TV before you can select USB.

- Antenna

: Displays the current antenna source,

Air

or

Cable

.

- Channel

: If you have selected TV, select the desired channel.

- Music/Photo

: If you have selected USB, follow these steps to

select a folder containing MP3 (Music) or JPEG (Photo) files on

the USB device:

✎

The maximum displayed number of files, including sub

folders, in one folder of USB storage device is 2000.

✎

The media may not be playing smoothly when using the

device lower than USB 2.0.

1. Use the

◄/►

buttons to move to the field under

Music

or the field under

Photo


ENTER

E

button. The TV displays a single folder (the Root folder)

and the type or name of the device.

The On Screen Menus

Your TV has two kinds of menus, the Main menu and the various

Tools menus. The Main menu gives you access to most or all of

the menu options available on your TV. The Tools menus display

a selected number of frequently used menu options that change

depending on the screen you are viewing. A Tools menu symbol

(

T

) in the lower right side of the screen indicates that a Tools menu

is available.

The Main menu has seven primary categories:

y

Picture

y

Input

y

Sound

y

Application

y

Channel

y

Support

y

Setup

To view the Main menu, press the

MENU

button on your remote. To

view a Tools menu, press the

TOOLS

button on your remote.

✎

The menu options that appear in the Main menu depend

on the Source you have selected. For example, if you have

selected the HDMI source, the Channel category will not

appear. To see the Channel category, you must first select TV

in the Source List.

The Menu options are presented below, arranged by Main menu

categories. A Tools button symbol

(

t

)

next to an option

name indicates the option is also available in one of the Tools

menus.

Picture Menu

Mode

t

Select your preferred picture mode.

✎

When your TV is connected to a PC, you can only select

Entertain

and

Standard

.

■

Dynamic

: Brightens the screen. Suitable for a bright room.

■

Standard

: Suitable for a normal normal.

■

Movie

: Darkens the screen, making it less glary. Suitable for

watching movies in a darkened room.

■

Entertain

: Sharpens the picture. Suitable for games.

✎

Only available when the

TV

is connected to a

PC

.

Backlight / Contrast / Brightness / Sharpness /

Color / Tint (G/R)

■

Backlight

: Adjusts the brightness of the screen by adjusting the

brightness of the individual pixels.

■

Contrast

: Increases or decreases the contrast between dark and

light areas of the picture.

■

Brightness

: Adjusts the brightness of the screen. Not as

effective as Backlight.

■

Sharpness

: Sharpens or dulls the edges of objects.

■

Color

: Adjusts the color saturation. The higher the Color setting,

the more intense the color. Low settings remove color and the

picture becomes black, white and gray.

■

Tint

: Adjusts the amount of green and red in the picture. As you

increase the amount of green, the amount of red decreases and

vice versa.

✎

When the TV is connected to a PC, you can only make

changes to

ight, Contrast, Brightness,

and

Sharpness.

Advanced Settings

Available in

Standard

and

Movie

mode only.

Compared to previous models, new Samsung TVs offer a more

precise picture with more precise controls.

✎

When your TV is connected to a PC, you can only make

changes to

Gamma

and

White Balance

.

■

Color Space (Auto / Native)

: Auto automatically matches the

range of colors available to create pictures to the color range of

the video source. Native provides a color range wider than the

color range of the video source.

■

White Balance

: Adjusts the color temperature of the picture so

that white objects look white (instead of, for example, slightly

pink or slightly yellow) and the overall color of the picture looks

natural.

R-Offset / G-Offset / B-Offset

: Adjusts each color’s (red,

green, blue) darkness.

R-Gain / G-Gain / B-Gain

: Adjusts each color’s (red, green,

blue) brightness.

Reset

: Resets the

White Balance

to it’s default settings.

■

Gamma

: Adjusts the primary color intensity.

■

Dynamic Contrast (Off / Low / Medium / High)

: Adjusts the

screen contrast.

■

Black Tone (Off / Dark / Darker / Darkest)

: Selects the black

level to adjust the screen depth. Darker settings make blacks

look darker.

■

Flesh Tone

: Adjusts the amount of red in skin tones.

■

Motion Lighting (Off / On)

: When on, the TV automatically

adjusts the brightness of the screen in response to the

brightness of the room. In bright light, the screen brightens. In

dim light, the screen dims.

✎

Available in

Standard

mode only.

Picture Options

✎

When the TV is connected to a PC, you can only make

changes to the

Color Tone

,

Size

and

HDMI Black Level

.

■

Color Tone (Cool / Standard / Warm1 / Warm2)

: Cool makes

the picture bluer (cooler). Warm 1 and Warm 2 make the picture

redder (warmer).

✎

Warm1

and

Warm2

are deactivated when the picture

mode is set to

Dynamic

.

■

Size

: Set the size and aspect ratio of the picture on the screen.

Your cable box or satellite receiver may have its own set of

screen sizes as well. However, we highly recommend you use

the TVs 16:9 mode most of the time.

16:9

: Sets the picture to the 16:9 wide screen format.

Zoom1

: Provides moderate magnification of the picture. Sides,

top, and bottom are cut off.

Zoom2

: Provides larger magnification of the picture. Sides, top,

and bottom are cut off.

Wide Fit

: Enlarges the aspect ratio of the picture so the picture

fits the entire screen.

4:3

: Sets the picture to the old, 4:3 format and puts black or gray

borders on the right and left of the picture.

✎

Do not watch your TV in the 4:3 format for a long time.

Traces of borders displayed on the left, right and center of

the screen may cause image retention (screen burn) which

is not covered by the warranty.

Screen Fit

: Displays the full image without any cut-off when

your TV is inputting HDMI (720p / 1080i / 1080p) or Component

(1080i / 1080p) HD signals.

✎

HD (High Definition) has a 16:9 aspect ratio and 1080i/1080p

(1920x1080) or 720p (1280x720) resolution.

✎

You can adjust and store settings for each external device you

have connected to an input on the TV. Picture Sizes available

by Input Source are listed below:

2. Press the

ENTER

E

button. A list of folders on the device

appears.

✎

If there are no folders on your device, press the

Yellow

select button to select the Root folder, and

then press the

RETURN

button. The Timer screen

re-appears.

3. Use the

▲/▼

buttons to highlight a folder that contains

music or photos, and then press the

Yellow

select button

to select the folder.

4. Press the

RETURN

button. The Timer screen re-appears.

■

Repeat

: Select

Once

,

Everyday

,

Mon~Fri

,

Mon~Sat

,

Sat~Sun

or

Manual

. If you select

Manual

, you can select the days you

want to activate the timer by using the

◄/►

buttons to highlight

the day, and then pressing the

ENTER

E

button. To unselect a

day, highlight it, and then press the

ENTER

E

button.

When you finished making all your selections on the Timer screen,

press either the

ENTER

E

or

RETURN

button.

❑

Other Features

Program Rating Lock

The

Program Rating Lock

feature lets you block programs

you've determined are inappropriate for your children based on

the program's ratings. To access the

Program Rating Lock

feature and make any changes, you must enter a PIN (personal

identification number). To watch a blocked program, you must also

enter the same PIN.

✎

Program Rating Lock

is not available in

HDMI

or

Component

mode.

✎

The default PIN number of a new TV set is “0-0-0-0”. You can

set your own PIN using the

Change PIN

function.

How It Works

When you access the

Program Rating Lock

Menu functions for

the first time, the PIN input screen appears. Enter 0-0-0-0. The PIN

screen closes and the

Program Rating Lock

Menu appears. Every

time you access the

Program Rating Lock

functions, the PIN

screen will appear and you must enter a PIN.

When the Rating Lock screen appears, select

Program Rating

Lock

, and then press

ENTER

E

. Select

On


ENTER

E

key again. Depending on what type of programs or

movies you want to block, select one of the options on the screen,

and then press the

ENTER

E

button. The options are listed below:

■

TV Parental Guidelines

: You can block TV programs based

on their ratings. This function allows you to control what your

children are watching.

■

MPAA Rating

: You can block movies based on their MPAA

ratings. The Motion Picture Association of America (MPAA) has

implemented a rating system that provides parents or guardians

with advanced information on which films are appropriate for

children.

■

Canadian English

: You can block TV programs based on their

Anglophone Canadian ratings.

■

Canadian French

: You can block TV programs based on their

French Canadian ratings.

■

Downloadable U.S. Rating

: Parental restriction information can

be used while watching DTV channels.

Locking/Blocking Programs or Movies

You lock or block programs and/or movies in essentially the same

way for each option. Each option displays a grid or table. All the

tables have ratings listed on the left. The TV Parental Guidelines

option also has kinds of content listed across the top:

ALL

: Lock all

TV ratings. /

FV

: Fantasy violence /

V

: Violence /

S

: Sexual situation

/

L

: Adult Language /

D

: Sexually Suggestive Dialog.

To lock/block movies or shows with certain ratings and/or kinds of

content, click the square next to the rating and/or under the kind of

content. A lock appears. To unlock/unblock, click the square again.

When you click a low rating, all the ratings above it will also display

locks. You can also Allow All or Lock All. When done, press the

RETURN

button on your remote.

■

Change PIN

: The Change PIN screen will appear. Choose any

4 digits for your PIN and enter them in

Enter New PIN

fields.

Re-enter the same 4 digits in

Confirm New PIN

fields. When the

Change PIN screen disappears, press the

OK

button. The TV

has memorized your new PIN.

✎

If you forget the PIN, press the remote-control buttons in

the following sequence, which resets the pin to “0-0-0-0” :

POWER

(off)

→

MUTE

→

8

→

2

→

4

→

POWER

(on)

Game Mode (On/Off)

When you connect a game console such as a PlayStation™

or Xbox™ to your TV, you can enjoy a more realistic gaming

experience by turning on the

Game Mode

function.

✎

Precautions and limitations for game mode:

x

Before you disconnect the game console and connect another

external device, set

Game Mode

to

Off

in the setup menu.

x

If you display the TV menu in

Game Mode

, the screen shakes

slightly.

✎

Game Mode

is not available when the input source is set to

TV

.

✎

After connecting the game console, set

Game Mode

to

On

.

You may notice slightly reduced picture quality.

Caption

(On-Screen Text Dialogue)

■

Caption

: You can switch the caption function on or off. If

captions are not available, they will not be displayed on the

screen.

✎

The

Caption

feature does not work in

Component

or

HDMI

mode.

■

Caption Mode

: You can select the desired caption mode.

Default / CC1~CC4 / Text1~Text4

: (analog channels only) The

Analog Caption function operates in either analog TV channel

mode or when a signal is supplied from an external device to the

TV. (Depending on the broadcasting signal, the Analog Caption

function may or may not work with digital channels.)

Default / Service1~Service6 / CC1~CC4 / Text1~Text4

:

(Digital channels only) The Digital Captions function works with

digital channels.

✎

Service1~6

may not be available in digital caption mode

depending on the broadcast.

■

Digital Caption Options

: (Digital channels only)

Size

: Options include Default, Small, Standard and Large. The

default is Standard.

Font Style

: Options include Default and Styles 0 to 7. The

default is Style 0.

Foreground Color

: Options include Default, White, Black, Red,

Green, Blue, Yellow, Magenta and Cyan. You can change the

color of the letters. The default is White.

Figures and illustrations in this User Manual are provided for reference

only and may differ from actual product appearance. Product design and

specifications may be changed without notice.

Important Warranty Information Regarding

Television Format Viewing

✎

See the warranty card for more information on warranty

terms.

Wide screen format LED Displays (16:9, the aspect ratio of the

screen width to height) are primarily designed to view wide screen

format full-motion video. The images displayed on them should

primarily be in the wide screen 16:9 ratio format, or expanded to

fill the screen if your model offers this feature and the images are

constantly moving. Displaying stationary graphics and images on

screen, such as the dark sidebars on non- expanded standard

format television video and programming, should be limited to no

more than 5% of the total television viewing per week. Additionally,

viewing other stationary images and text such as stock market

reports, video game displays, station logos, web sites or computer

graphics and patterns, should be limited as described above for

all televisions. Displaying stationary images that exceed the above

guidelines can cause uneven aging of LED Displays that leave

subtle, but permanent burned-in ghost images in the LED picture.

To avoid this, vary the programming and images, and primarily

display full screen moving images, not stationary patterns or dark

bars. On LED models that offer picture sizing features, use these

controls to view different formats as a full screen picture. Be careful

in the selection and duration of television formats you use for

viewing. Uneven LED aging as a result of format selection and use,

as well as burned-in images, are not covered by your Samsung

limited warranty.

• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED

WARRANTY STATEMENT

Subject to the requirements, conditions, exclusions and limitations

of the original Limited Warranty supplied with Samsung Electronics

(SAMSUNG) products, and the requirements, conditions, exclusions

and limitations contained herein, SAMSUNG will additionally

provide Warranty Repair Service in the United States on SAMSUNG

products purchased in Canada, and in Canada on SAMSUNG

products purchased in the United States, for the warranty period

originally specified, and to the Original Purchaser only.

The above described warranty repairs must be performed by a

SAMSUNG Authorized Service Center. Along with this Statement,

the Original Limited Warranty Statement and a dated Bill of Sale

as Proof of Purchase must be presented to the Service Center.

Transportation to and from the Service Center is the responsibility of

the purchaser. Conditions covered are limited only to manufacturing

defects in material or workmanship, and only those encountered

in normal use of the product. Excluded, but not limited to, are

any originally specified provisions for, in-home or on-site services,

minimum or maximum repair times, exchanges or replacements,

accessories, options, upgrades, or consumables.

For the location of a SAMSUNG Authorized Service Center, please

call toll-free:

–– In the United States : 1-800-SAMSUNG (1-800-726-7864)

–– In Canada : 1-800-SAMSUNG

Still image warning

Avoid displaying still images (such as jpeg picture files) or still

image elements (such as TV channel logos, TV shows or movies

in panorama or 4:3 format, stock or news scroll bars, etc.) on the

screen. The constant display of still pictures can cause ghosting or

image burn-in (image retention) on the LED screen, which will affect

image quality. To reduce the risk of this effect, please follow the

recommendations below:

• Avoid displaying the same TV channel for long periods.

• Always try to display any image in full screen mode. Use the TV's

Picture Options menu to select the optimal screen size.

• Reduce brightness and contrast values to the minimum required

to achieve the desired picture quality.

Values that exceed the

minimum may speed up the burn-in process.

• Frequently use all TV features designed to reduce image retention

and screen burn-in. Refer to proper user manual section for

details.

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products,

please contact the SAMSUNG customer care center.

Country

CANADA

U.S.A.

Address

Samsung Electronics

Canada Inc., Customer

Service 55 Standish Court

Mississauga, Ontario L5R

4B2 Canada

Samsung Electronics

America, Inc.

85 Challenger Road

Ridgefield Park, NJ

07660-2112

Customer Care

Center



1-800-SAMSUNG(726-7864)

Web Site

www.samsung.com

LED TV

user manual

© 2012 Samsung Electronics Co., Ltd. All rights reserved.

- 2 -

- 1 -

- 6 -

- 5 -

- 3 -

- 7 -

- 4 -

- 8 -

BN68-04214B-01

Background Color

: Options include Default, White, Black, Red,

Green, Blue, Yellow, Magenta and Cyan. You can change the

background color of the captions. The default is Black.

Foreground Opacity

: This adjusts the opacity of text. Options

include Default, Transparent, Translucent, Solid and Flashing.

Background Opacity

: This adjusts the opacity of the caption

background. Options include Default, Transparent, Translucent,

Solid and Flashing.

Return to Default

: This option sets each Size, Font Style,

Foreground Color, Background Color, Foreground Opacity and

Background Opacity to its default.

✎

Digital Caption Options

are available only when you can

select

Default

and

Service1 ~ Service6

in

Caption Mode

.

✎

The Foreground and Background cannot be set to the

same color.

Melody

Lets you control whether a melody plays when the TV is turned on

or off.

✎

The

Melody

does not play:

x

When no sound is output from the TV because the

MUTE

button has been pressed.

x

When no sound is output from the TV because the volume

has been reduced to minimum with the

VOL –

button.

x

When the TV is turned off by the

Sleep Timer

function.

Auto Protection Time

■

Auto Protection Time (Off / 10 min / 20 min / 40 min / 1 hour)

:

If the screen remains idle with a still image for a certain period

of time you define, the screen saver is activated to prevent the

formation of ghost images on the screen.

Eco Solution

■

Energy Saving (Off / Low / Medium / High / Picture Off)

:

This adjust the brightness of the TV in order to reduce power

consumption. If you select

Picture Off

, the screen is turned

off, but the sound remains on. Press any button except volume

button to turn on the screen.

■

Eco Sensor (Off / On)

: To enhance your power savings; the

picture settings will automatically adapt to the light in the room.

✎

If you adjust the

Backlight

, the

Eco Sensor

will be set to

Off

.

Min. Backlight

: When

Eco Sensor

is

On

, the minimum screen

brightness can be adjusted manually.

✎

If

Eco Sensor

is

On

, the display brightness may change

(become slightly darker in most cases) depending on the

surrounding light intensity.

■

No Signal Power Off (Off / 15 min. / 30 min. / 60 min.)

: Sets

how quickly the TV switches to standby mode, if no picture is

being received.

✎

Disabled when the PC is in power saving mode.

■

Auto Power Off (Off / On)

: The TV will be automatically turned

off when no user operation is received for 4 hours.

Support Menu

Self Diagnosis

■

Picture Test

: Use to check for picture problems. If the problem

appears in the test picture, select Yes and follow the directions

on the screen.

■

Sound Test

: Use the built-in melody sound to check for sound

problems. If the problem occurs during the test, select Yes and

follow the directions on the screen.

■

Signal Strength

: (Digital channels only) An HD channel’s

reception quality is either perfect or the channels are unavailable.

Adjust your antenna to increase signal strength.

■

Reset

: Reset all settings to the factory defaults.

✎

The PIN input screen appears before the setup screen.

✎

Enter your 4-digit PIN. Change the PIN using the

Change

PIN

option.

Software Upgrade

Software Upgrade

can be performed by downloading the latest

firmware from samsung.com to a USB memory device.

HD Connection Guide

Refer to this information when connecting external devices to the

TV.

Contact Samsung

View this information when your TV does not work properly or

when you want to upgrade the software. You can find information

regarding our call centers and how to download products and

software.

Media Play

Enjoy photos, music and/or movie files saved on a

USB Mass Storage Class (MSC) device.

MEDIA.P

❑

Connecting a USB Device

1.

Turn on your TV.

2.

Connect a USB device containing photo, music, and/or movie

files to the

USB

jack on the back of the TV. A pop up window

appears.

3.

Press the

MEDIA.P

button on your remote. The Media Play

menu appears.

❑

Using the Media Play Menu

SUM

■

Change Device

E

Enter

R

Return

Media Play

Videos

To open Media Play in the Menu, follow these steps:

1.

Press the

MENU

button. Then, press the

▲

or

▼

button to

select

Application

on the left, and then press the

ENTER

E

button.

2.

Press the

▲

or

▼

button to select

Media Play (USB)

, and then

press the

ENTER

E

button.

3.

Press the

◄

or

►

button to select an icon (

Videos, Music,

Photos, Settings

), and then press the

ENTER

E

button.

✎

Media Play might not work properly with unlicensed

multimedia files.

✎

Need-to-Know List before using

Media Play (USB)

x

The file system supports FAT16, FAT32 and NTFS.

x

Certain types of USB Digital camera and audio devices may not

be compatible with this TV.

x

Media Play

only supports USB Mass Storage Class (MSC)

devices. MSC is a Mass Storage Class Bulk-Only Transport

device. Examples of MSC are Thumb drives and Flash Card

Readers. Devices should be connected directly to the TV’s USB

port. USB HDD is not supported.

Input Source

Picture Size

ATV, AV, Component (480i, 480p)

16:9

,

Zoom1

,

Zoom2

,

4:3

DTV (1080i, 1080p), Component (1080i,

1080p), HDMI (720p, 1080i, 1080p)

16:9

,

Wide Fit

,

4:3

,

Screen Fit

■

Digital Noise Filter (Off / Low / Medium / High / Auto)

: If the

broadcast signal received by your TV is weak, you can activate

the

Digital Noise Filter

feature to reduce any static and ghosting

that may appear on the screen.

✎

When the signal is weak, try all the Digital Noise Filter

options until the TV displays the best picture.

■

HDMI Black Level (Normal / Low)

:

For HDMI signals, select

the black level to adjust the screen depth. Low make blacks look

darker.

✎

Available only in

HDMI

mode (RGB signals).

■

Film Mode (Off / Auto)

: Sets the TV to automatically sense and

process film signals from all sources and adjusts the picture for

optimum quality.

✎

Available in ATV, DTV (interlace), AV, COMPONENT (480i /

1080i) and HDMI (480i / 1080i).

■

Auto Motion Plus (Off / Clear / Standard / Smooth / Custom /

Demo)

: Enhances motion in fast moving scenes.

✎

The info screen on your TV displays the resolution and

frequency of the incoming video signal (60Hz). This

displayed frequency is not what the TV is displaying by

using the

Auto Motion Plus

function.

■

LED Motion Plus (Off / On)

: Removes drag from fast scenes

with a lot of movement to provide a clear picture.

Picture Reset

■

Picture Reset (Reset Picture Mode/Cancel)

: Resets the

picture settings to their factory defaults.

Sound Menu

Mode

t

■

Standard

: Selects the normal sound mode.

■

Music

: Emphasizes music over voices.

■

Movie

: Provides the best sound for movies.

■

Clear Voice

: Emphasizes voices over other sounds.

■

Amplify

: Increase the intensity of high-frequency sounds to allow

a better listening experience for the hearing impaired.

Equalizer

Available in Standard sound mode only.

■

Balance L/R

: Adjusts the balance between the right and left

speaker.

■

100Hz / 300Hz / 1KHz / 3KHz / 10KHz

(Bandwidth

Adjustment): Adjusts the loudness of specific bandwidth

frequencies.

■

Reset

: Resets the equalizer to its default settings.

SRS TruSurround HD (On/Off)

Available in Standard sound mode only.

SRS TruSurround HD is a patented SRS technology that solves

the problem of playing 5.1 multichannel content through two

speakers. TruSurround delivers a compelling, virtual surround

sound experience through any two-speaker playback system,

including internal television speakers. It is fully compatible with all

multichannel formats.

Preferred Language

Digital channels only.

Digital-TV broadcasts can transmit many audio tracks

simultaneously (for example, simultaneous translations of a program

into foreign languages).

✎

You can only select a language from among the ones being

broadcast.

Multi-Track Sound (MTS)

Analog channels only.

■

Mono

: Select for channels that are broadcasting in mono or if

you are having difficulty receiving a stereo signal.

■

Stereo

: Select for channels that are broadcasting in stereo.

■

SAP

: Select to listen to the Separate Audio Program, which is

usually a foreign-language translation.

✎

Depending on the program being broadcast, you can listen to

Mono, Stereo

or

SAP

.

Auto Volume

Because each station has its own broadcasting conditions, the

volume may fluctuate each time you change the channel. This

feature automatically adjusts the volume of a channel by lowering

the sound output when the modulation signal is high or by raising

the sound output when the modulation signal is low.

SPDIF Output

The SPDIF (Sony Philips Digital InterFace) outputs an

uncompressed digital audio signal when you connect the digital

audio jack on the back of the TV to a digital audio in jack on a

receiver or home theater.

■

Audio Format (PCM/Dolby Digital)

: You can select the Digital

Audio output (SPDIF) format. The available Digital Audio output

format may differ depending on the input source.

✎

By connecting the TV to a receiver or home theater with

Dolby Digital

and 5.1ch speakers and selecting

Dolby

Digital

, you can maximize your interactive 3D sound

experience.

■

Audio Delay

: Lets you correct timing mismatches between the

audio track and the video when you are watching the TV and

listening to digital audio output from the TV through an external

device such as an AV receiver. When you select

Audio Delay

, a

slider appears. Use the left and right arrow buttons to adjust the

slider. Press

ENTER

E

when done (0ms ~ 250ms).

Speaker Settings

■

Speaker Select (External Speaker / TV Speaker)

If you are listening to the sound track of a broadcast or movie

through an external receiver, you may hear a sound echo caused

by the difference in decoding speed between the TV’s speakers

and the speakers attached to your audio receiver. If this occurs,

set the TV to

External Speaker

.

✎

When you set

Speaker Select

to

External Speaker

, the

TV’s speakers are turned off. You will hear sound through

the external speakers only. When you set

Speaker Select

to

TV Speaker

both the TV’s speakers and the external

speakers are on. You will hear sound through both.

✎

When

Speaker Select

is set to

External Speaker

, the

VOLUME

and

MUTE

buttons will not operate and the

sound settings will be limited.

✎

If there is no video signal, both the TV’s speakers and the

external speakers will be mute.

Sound Reset

■

Reset All

: Resets all sound settings to the factory defaults.

Samsung UN55EH6000F User Manual Ver.1.0 (English) - Page 1

Samsung UN55EH6000F Manual

Page 1 highlights