Samsung WA45N3050AW/A4 User Manual - Page 23
for the water, temperature. If you select
View all Samsung WA45N3050AW/A4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
WA3100M_DC68-03850A-05_EN.indd 23 4. Connect the ends of the water supply hoses to the water supply intake connections at the back of the washer. CAUTION The water supply hose connected to the hot faucet must be connected to the hot water supply intake and the water hose connected to the cold faucet must be connected to the cold water supply intake. 5. Tighten the fittings by hand until they are snug, and then tighten them an additional two-thirds of a turn with a plier. NOTE To ensure correct water usage, connect both the hot and cold water faucets. If either or both are not connected, the Cool (no fill) LED will flash. NOTE If you do not want to use the hot water supply hose, insert the water intake cap into the hot water supply intake hole. In this case, you must select the Cold for the water temperature. If you select the Cold, all the lamps for the water temperature options are turned off. CAUTION Confirm that the water supply hoses are not twisted or bent. If the hoses are twisted or bent, the hoses can leak and cause electric shock due to the water leakage. 6. Turn on the hot and cold water supplies and check all the water supply intake connections and the faucets for water leaks. English 23 2019-02-14 6:21:48 Installation