Samsung WA484DSHASU/A1 Trouble Shooting Guide User Manual Ver.1.0 (English, Fr - Page 9
Fast Time Down Test Mode, WARNING
View all Samsung WA484DSHASU/A1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
ALIGNMENT AND ADJUSTMENTS WARNING To avoid risk of electrical shock, personal injury or death; disconnect power to washer before servicing, unless testing requires power. Fast Time Down Test Mode Definition of Fast Time Down Test Mode: - Fast Time Down Test Mode is to forward the program to the next cycle stage. How to Enter: - To enter the Fast Time Down Test Mode, press the Temp key during Service Mode. Fast Time Down Test Mode: 1. Activate the Service Mode in advance. 2. To forward the program to the next cycle stage, press the Temp key. Each stage is located at key points of a complete cycle as follows: - End of Each Fill (Beginning of Wash or Rinse Tumble Session) Caution: Check if the current water level is higher than the Reset water level and then perform the Fast time down test. - Beginning of Drain Session - Beginning of Spin Session (Here, it checks the water level. So, if it is over the reset level, it carries out draining before the spinning.) - Beginning of Fill Session - Beginning of Bleach Fill - Beginning of Fabric Softener Fill - Every 3 minutes during Wash and Rinse Tumble Session 9 [Technical information]WA484DSHA_03051B_EN.indd 9 2012-06-25 �� 11:12:01