Samsung WA49B5205AW/US User Manual - Page 60
update completes. The time required to complete the firmware
View all Samsung WA49B5205AW/US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Troubleshooting Code 8C dn Meaning Check the MEMS sensor. • Power the washer off. Wait 2-3 minutes, power the washer on, and then try again. • If the problem continues, call for service. Firmware update is in progress through SmartThings. • To use the product, wait about 30 minutes until the firmware update completes. (The time required to complete the firmware update may vary depending on your Internet connection.) • This code will remain on the display, regardless of power on and off, until the firmware update is complete. For any codes not listed above, call 1-800-726-7864 (1-800-SAMSUNG). Troubleshooting 60 English
Troubleshooting
English
60
Troubleshooting
Code
Meaning
8C
Check the MEMS sensor.
•
Power the washer off. Wait 2-3 minutes, power the washer on, and
then try again.
•
If the problem continues, call for service.
dn
Firmware update is in progress through SmartThings.
•
To use the product, wait about 30 minutes until the firmware
update completes. (The time required to complete the firmware
update may vary depending on your Internet connection.)
•
This code will remain on the display, regardless of power on and
off, until the firmware update is complete.
For any codes not listed above, call 1-800-726-7864 (1-800-SAMSUNG).