Samsung WB380F User Manual - Page 142

Error messages When the following error messages appear, try these remedies. Error message Cannot read file content Card Error Card not supported. Connection failed. DCF Full Error Device disconnected. Suggested remedies Delete the damaged file or contact a service center. • Turn off the camera, and then turn it on again. • Remove the memory card, and then insert it again. • Format the memory card. The inserted memory card is not supported by your camera. Insert a microSD, microSDHC, or microSDXC memory card. • The camera cannot connect to the network using the selected access point. Select another AP and try again. • The camera has failed to connect to the other devices. Try connecting again. File names do not match the DCF standard. Transfer the files from the memory card to your computer and format the card. Then, open the Settings menu and select File No. → Reset. (p. 137) Network connection disconnected while photos are being transferred to supported devices. Re-select a supported device. Error message File system not supported. Initialization failed. Low Battery Memory Full No Image File Password Incorrect Transfer failed. Suggested remedies Your camera does not support the FAT file structure of the inserted memory card. Format the memory card on the camera. The camera has failed to locate a device that supports Samsung Link. Turn on devices on the network that support Samsung Link. Insert a charged battery or recharge the battery. Delete unnecessary files or insert a new memory card. Capture photos or insert a memory card that contains some photos. The password for transferring files to another camera is wrong. Enter the correct password. • The camera has failed to send e-mails or files to other devices. Try sending again. • Check the network connection and try again. Appendixes 141