Samsung WEP250 Quick Guide (user Manual) (ver.1.0) (English) - Page 2

Understanding various modes, Pairing with your Bluetooth phone, Specifications, Using call functions

Page 2 highlights

Understanding various modes Standby mode: The headset is waiting for a call. The blue indicator light flashes every 3 seconds. Active mode: The headset has a call in progress. The blue indicator light flashes every 8 seconds. Pairing mode: The blue indicator light stays lit. You can discover and connect to your headset on your phone. Low battery mode: There is less than 10% of battery power left. The red indicator light flashes. You must recharge the battery. Pairing with your Bluetooth phone 1 Enter Pairing mode. If you turn it on for the first time, it proceeds into Pairing mode immediately. Make sure that the headset is off, and press and hold the Multi-function button until the blue indicator light remains lit after blinking. Press and hold the Multi-function button to: Make a voice-activated call Reject an incoming call In Active mode Press the Multi-function button to: End a call Transfer a call from the phone to the headset Press and hold the Multi-function button to: Place a call on hold Answer a second call Rretrieve a call on hold Press [+] or [-] to adjust the volume. Press and hold [+] or [-] to turn the microphone off or on. 2 Search for and pair with your phone according to your phone's user guide. (Bluetooth PIN: 0000, 4 zeros) If the pairing is successful, the blue indicator light will flash 10 times rapidly before entering Standby mode. If the blue indicator light remains lit, retry pairing. NOTE: When the headset and the phone are paired, the headset attempts to reconnect automatically each time it turns on. Otherwise, press the Multi-function button to reconnect. Using call functions Some functions may not be supported by your phone. In Standby mode Press the Multi-function button to: Answer an incoming call Redial the last number called Specifications Items Specifications and description Bluetooth version 2.0 + EDR Support profile Headset Profile, Hands-Free Profile Operating range Up to 30 feet (10 meters) Maximum Standby time Up to 100 hours* Maximum Active Up to 6 hours* time *Depending on the phone type and usage, the actual time may vary.

  • 1
  • 2

1
Enter Pairing mode.
2
Search for and pair with your phone according to
your phone’s user guide. (Bluetooth PIN: 0000,
4 zeros)
If the pairing is successful, the blue indicator
light will flash 10 times rapidly before entering
Standby mode.
If the blue indicator light remains lit, retry pairing.
NOTE
:
When the headset and the phone are paired, the
headset attempts to reconnect automatically each
time it turns on. Otherwise, press the Multi-function
button to reconnect.
Understanding various modes
Pairing with your Bluetooth phone
Specifications
Some functions may not be supported by your phone.
Using call functions
Press the Multi-function button to:
Answer an incoming call
Redial the last number called
In Standby mode
In Active mode
Standby mode
: The headset is waiting for a call.
The blue indicator light flashes every 3 seconds.
Active mode
: The headset has a call in progress.
: The headset has a call in progress.
The blue indicator light flashes every 8 seconds.
Pairing mode
: The blue indicator light stays lit.
You can discover and connect to your headset on
your phone.
Low battery mode
: There is less than 10% of
: There is less than 10% of
battery power left. The red indicator light flashes.
You must recharge the battery.
Press and hold the Multi-function button to:
Make a voice-activated call
Reject an incoming call
Press the Multi-function button to:
End a call
Transfer a call from the phone to the headset
Press and hold the Multi-function button to:
Place a call on hold
Answer a second call
Rretrieve a call on hold
Press [+] or [-] to adjust the volume.
Press and hold [+] or [-] to turn the microphone off
or on.
Bluetooth version
2.0 + EDR
Support profile
Headset Profile, Hands-Free Profile
Operating range
Up to 30 feet (10 meters)
Maximum
Standby time
Up to 100 hours*
Maximum Active
time
Up to 6 hours*
Items
Specifications and description
*
Depending on the phone type and usage, the actual time may vary.
Make sure that the headset is off, and press and
hold the Multi-function button until the blue
indicator light remains lit after blinking.
If you turn it on for the first time, it proceeds into
Pairing mode immediately.