Samsung WEP460 User Manual (ENGLISH) - Page 2

Understanding various modes, Pairing with your Bluetooth phone, Using call functions - bluetooth headset

Page 2 highlights

Understanding various modes • Standby mode: The headset is waiting for a call. The blue indicator light flashes every 6 seconds. • Active mode: The headset has a call in progress.  The blue indicator light flashes every 8 seconds. • Pairing mode: The blue indicator light stays lit.  You can discover and connect to your headset on your phone. • Low battery mode: There is less than 10% of battery power left. The red indicator light flashes. You must recharge the battery. Pairing with your Bluetooth phone 1 Enter Pairing mode. • If you turn the headset on for the first time, it proceeds into Pairing mode immediately. • Make sure that the headset is off, and press and hold the Multi-function botton until the indicator light turns on blue and stays lit after blinking. Press and hold the Multi-function button to: • Redial the last number called • Reject an incoming call In active mode Press the Multi-function button to: • End a call • Transfer a call from the phone to the headset Press and hold the Multi-function button to: • Place a call on hold • Answer a second call • Retrieve a call on hold Press [+] or [-] to adjust the volume. Press and hold [+] or [-] to turn the microphone off or on. 2 Search for and connect with your phone according to your phone user's guide. (Bluetooth PIN: 0000, 4 zeros). • If the pairing is successful, the blue indicator light will flash 10 times rapidly before entering Standby mode. • If the blue indicator light remains lit, retry pairing. NOTE: When the headset and the phone are paired, the headset attempts to reconnect automatically each time it turns on. Otherwise, press the Multi-function button to reconnect. Using call functions Some functions may not be supported by your phone. In Standby mode Press the Multi-function button to: • Answer an incoming call • Make a voice-activated call Specifications Item Specifications and description Bluetooth version 2.0+EDR Support profile Headset Profile, Hands-Free Profile Operating range Up to 30 feet (10 meters) Standby time Up to 180 hours* Talk time Up to 8 hours* Charging time Approximately 2 hours* * D epending on the phone type and usage, the actual time may vary.

  • 1
  • 2

Understanding various modes
Standby mode
: The headset is waiting for a call.
The blue indicator light flashes every 6 seconds.
Active mode
: The headset has a call in progress.
The blue indicator light flashes every 8 seconds.
Pairing mode
: The blue indicator light stays lit.
You can discover and connect to your headset on
your phone.
Low battery mode
: There is less than 10% of
battery power left. The red indicator light flashes.
You must recharge the battery.
Pairing with your Bluetooth phone
1
Enter Pairing mode.
If you turn the headset on for the first time, it
proceeds into Pairing mode immediately.
Make sure that the headset is off, and press and
hold the Multi-function botton until the indicator
light turns on blue and stays lit after blinking.
2
Search for and connect with your phone according
to your phone user's guide. (Bluetooth PIN: 0000,
4 zeros).
If the pairing is successful, the blue indicator
light will flash 10 times rapidly before entering
Standby mode.
If the blue indicator light remains lit, retry pairing.
NOTE:
When the headset and the phone are paired, the headset
attempts to reconnect automatically each time it turns on.
Otherwise, press the Multi-function button to reconnect.
Using call functions
Some functions may not be supported by your phone.
In Standby mode
Press the Multi-function button to:
Answer an incoming call
Make a voice-activated call
Press and hold the Multi-function button to:
Redial the last number called
Reject an incoming call
In active mode
Press the Multi-function button to:
End a call
Transfer a call from the phone to the headset
Press and hold the Multi-function button to:
Place a call on hold
Answer a second call
Retrieve a call on hold
Press [
+
] or [
-
] to adjust the volume.
Press and hold [
+
] or [
-
] to turn the microphone off
or on.
Specifications
Item
Specifications and description
Bluetooth version
2.0+EDR
Support profile
Headset Profile, Hands-Free Profile
Operating range
Up to 30 feet (10 meters)
Standby time
Up to 180 hours*
Talk time
Up to 8 hours*
Charging time
Approximately 2 hours*
* Depending on the phone type and usage, the actual time may
vary.