Samsung WEP500 Quick Guide (user Manual) (ver.1.0) (English) - Page 2

Features and Functions Guide SAMSUNG Bluetooth Mono Headset WEP500 Important: Be sure to first follow the Quick Start Guide on the reverse side of this guide to complete initial setup of your headset. Headquarters: 1301 East Lookout Drive Suite 150 Richardson, TX 75082 Internet Address: http://www.samsungmobileusa.com/ accessories Customer Care Center: 1-888-987-4357 Turn headset on or off To turn the headset on, Press and hold the Multi-Function button for 4 seconds until you see 4 blue flashes on the indicator light. You will hear a tone and see the indicator light flashes while the power is on (see Meaning of the indicator light of this guide). To turn the headset off, Press and hold the Multi-Function button for 4 seconds until you see blue and red flashes on the indicator light. You will hear series of 2 tones and see the indicator light stops flashing. Wear the headset Wear the headset in your ear. In general, you will get better performance when there are no obstructions (including parts of your body) between the headset and the phone. You can replace the original earpiece cover with the supplied earpiece cover. Depending on what ear you are going to wear the headset, simply adjust the cover accordingly. Adjust the volume Press [ ] on the side of the headset to increase the volume level and [ ] to decrease the volume level. Your headset has the Auto volume control feature which changes the volume level you have selected to the most suitable level automatically according to the noise around you. Left Right Left Right At very high volumes, prolonged listening to the headset can damage your hearing. Troubleshooting My phone does not find my headset. Make sure the blue indicator light on your headset turns on when your phone is searching for devices. My headsest worked before but now it is not working. Make sure your phone is on and the Bluetooth feature is turned on in your phone. If the Bluetooth feature has been turnned off or was turned on only temporarily, you may need to restart the Bluetooth feature. If you have confirmed the Bluetooth feature is on in your phone, pair your phone and headset again. Make calls Making a voice activated call If the phone's voice recognition feature is on, you can make a voice activated call. Press and hold the Multi-Function button. You will hear the voice-activation tone. Say the name of the person you wish to call. Depending on your phone, this feature may not be supported. Redialing the last number Press the Multi-Function button. When you release the button, the phone dials the last dialed or received number. Depending on your phone, how to redial the last number may vary. Ending a call Press the Multi-Function button. Answering a call When a call comes in, the headset sounds the ring tone and flashes the blue indicator twice. Press the Multi-Function button. Switching off or on the microphone (Mute) Press and hold [ ] or [ ] to switch off the headset's microphone. To switch it back on, press and hold either one of the buttons again. Transferring a call from the phone to the headset If you answer the call with your phone, you can transfer the call to the headset by pressing the Multi-Function button. Turning the indicator light on or off You can deactivate the use of the indicator light in Standby mode and in Active mode. Press and hold [ ] and [ ] at the same time to turn the indicator light on or off. Use enhanced features Enhanced features are available for phones that support the Hands-free profile and enhanced features. Depending on your phone, this feature may not be supported. • Rejecting a call When you receive a call, press and hold the Multi-Function button. Depending on your phone's setting or type, you may only be able to mute the ringer. • Place a call on hold While you are on a call, press and hold the Multi-Function button. To retrieve the call, press and hold the button again. • Answering a second call When your phone notifies you of another incoming call while you are on a call, press and hold the Multi-Function button to answer the second call. You can switch between calls by pressing and holding the button. Pressing the Multi-Function button quickly ends the current call and answers the second call. Meaning of the indicator light Light Tone Flashes in blue every 8 seconds. Quick series of 2 tones. (Active mode starts.) Status • The headset is in Active mode. • The headset has an active call in progress. • You can talk up to 3.5 hours.* Flashes in blue every 3 seconds. Quick series of 2 tones. (Standby mode starts.) • The headset is in Standby mode. • The headset is waiting for a call. • The headset can be in Standby mode up to 80 hours.* Flashes in red. 5 tones every 20 seconds. • The battery of the headset is low. • There is less than 10% of battery power left. Recharge the battery. *Depending on the phone type and usage, the actual time may vary.