Samsung WF206BNW Quick Guide (easy Manual) (ver.1.0) (English) - Page 23
SAMSUNG, Code Symbol, Meaning, Solution
View all Samsung WF206BNW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Troubleshooting Code Symbol Meaning Problem with control. Solution Call for service. See below. Electric service was lost when Washer was running. A fault is detected in the water level sensor. Jammed Key. Restart the cycle by pressing the Cycle Selector dial. Call for service Call for service Motor speed sensor problem. Restart the cycle. If the code reappears, call for service, see below Temperature sensor problem. Restart the cycle. If the code reappears, call for service, see below High current detected. Restart the cycle. If the code reappears, call for service, see below High/Low voltage detected. Restart the cycle. If the code reappears, call for service, see below Vibration sensor problem. Restart the cycle. If the code reappears, call for service, see below SilverCare™ control problem Restart the cycle. If the code reappears, call for service, see below. Too much SUdS is detected during the washing session. And, the unit is put on hold until the suds get reduced. Then, it will go back to the operation. When it finishes washing, End and SUdS codes will blink in turn. To prevent it, cut down on detergents. For any codes not listed above, call 1-800-726-7864 (1-800-SAMSUNG) SAMSUNG Clothes Washer Owner's Instructions E-4