Samsung WF6200 User Manual - Page 21
Step 3, Step 4
View all Samsung WF6200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Installation STEP 3 Adjust the levelling feet STEP 4 Connect the water hose B A 1. Gently slide the washer into position. Excessive force may damage the levelling feet. 2. Level the washer by manually adjusting the levelling feet. 3. When levelling is complete, tighten the nuts using the spanner. NOTE An adjustable wrench or 17 mm openend wrench is required to loosen or tighten the leveling feet. CAUTION • Make sure you use a new water hose, and there are rubber gaskets (B) inside the couplings (A) at either end of the water hose. A water hose without the gasket may leak. • If there is a water leak, stop using the washer and contact a local Samsung service center. A water leak may cause electric shock. • Do not stretch the water hose by force. If the hose is too short, replace the hose with a longer, high-pressure hose. • To prevent leaks, make sure both water hoses are not bent or kinked. A water leak may cause electric shock. 8',"7 JOEE English 21