Samsung YP-300H User Manual (user Manual) (ver.1.0) (English) - Page 9
Connecting yepp to PC with USB cable, How to check USB driver
![]() |
View all Samsung YP-300H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Connecting yepp to PC with USB cable 1 Insert the battery into yepp and turn on the power. 2 Plug one end of the USB cable into the USB port on the back of PC. 3 Plug the other end of the USB cable into the USB port at the bottom. PC may temporarily malfunction if you unplug the USB cable from PC while yepp Audio Manager is initiating or executing a command. USB driver is installed with a message saying that it is searching for a new device. If USB driver is not installed, try one more time after rebooting PC. 16 USB connect cable 4 When USB driver is not Installed automatically, refer to next page. 5 When USB driver is installed, "SAMSUNG YP-300" will appear in [System Properties] ➝ [Device Manager] as shown in the picture below. Note : How to check USB driver Windows 98,ME: Control Panel ➝ System ➝ Device Manager Windows 2000: Control Panel ➝ System ➝ Hardware ➝ Device Manager Windows XP: Control Panel ➝ System ➝ Hardware ➝ Device Manager 17
![](/manual_guide/products/samsung-yp300h-user-manual-user-manual-ver10-english-918ed0e/9.png)