Samsung YP-35 Quick Guide (easy Manual) (English) - Page 1
Samsung YP-35 Manual
View all Samsung YP-35 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
USB connect cable ➡ Quick-35 2/26/04 11:39 AM Page 2 YP-35 Quick Guide Location of Controls Microphone Earphone Jack SRS Button Display Play/Stop/Pause/ Forward/Backward Button MENU/Loop Repeating/ Mode/Volume Button USB Cable Connection Port Battery Cover Neck strap Hook Hold Switch Playing Music When you press the button, the yepp logo appears and a music/voice file is played. Stopping Music When you press the button while playing, the music stops. If no buttons are pressed within 10 seconds (changes depending on settings), the yepp automatically powers off. ● You can also turn off the power by pressing and holding the button. 1 Connecting the USB cable ➤ Before connecting yepp to PC, make sure to install USB driver. 1 Plug one end of the USB cable into the USB port on the PC. 2 Connect the opposite end of the USB cable to the USB cable port on the bottom of the yepp. ● If you disconnect the USB cable from your PC while implementing a command or initializing during USB driver installation, your PC may not function correctly. ● The yepp will automatically turn on. 3 USB driver is installed with a message saying that it is searching for a new device. You may not see the display screen during installation. Go to the device manager to check that installation has been successfully completed. 4 Upon installation of the USB driver "SAMSUNG YP-35" will appear in the [System Properties] ➝ [Device Manager]. 2