Samsung YP-55V Upgrade Procedure. ( ) - Page 8
Connecting yepp to PC with USB cable - yp 55 driver
View all Samsung YP-55V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Connecting yepp to PC with USB cable 3 Plug one end of the USB cable into the USB port on the back of the PC. 4 Connect the opposite end of the USB cable to the USB cable port on the bottom of the yepp. ● If you disconnect the USB cable from your PC while implementing a command or initializing during USB driver installation, your PC may not function correctly. ● The yepp will automatically turn on. 5 USB driver is installed with a message saying that it is searching for a new device. You may not see the display screen during installation. Go to the device manager to check that installation has been successfully completed. 6 Upon installation of the USB driver "SAMSUNG YP-55" will appear in the [System Properties] ➝ [Device Manager]. 14 USB connect cable MODE VOL REC / ENC Note : How to check USB driver Windows 98: Control Panel ➝ System ➝ Device Manager ➝ Universal Serial Bus controllers/Samsung YP-55 Class Windows 2000: Control Panel ➝ System ➝ Hardware ➝ Device Manager ➝ Universal Serial Bus controllers ➝ USB Mass Storage Device Windows XP: Control Panel ➝ System ➝ Hardware ➝ Device Manager ➝ Universal Serial Bus controllers ➝ USB Mass Storage Device 7 When USB driver is not installed automatically, refer to next page. Note : For WinXP, the following window will appear whenever you connect the USB cable to your yepp. 15