Samsung YP-S2ZB User Manual (ENGLISH) - Page 11

CHARGING THE BATTERY, Earphone/USB Connection Jack of the player.

Page 11 highlights

CHARGING THE BATTERY Charge the player before using it for the first time and when you haven't used it for a long time. The battery for your mp3 player will fully charge in about 2 hours, although total charging time varies depending on your PC environment. ƒ Before you start - Remove the earphones before connecting the direct connect USB adaptor. 1 (B) 2 (A) 1. Connect the mini plug end (A) of the direct connect USB adaptor to the Earphone/USB Connection Jack of the player. 2. Connect the wide (USB) end (B) of the direct connect USB adaptor to the USB port ( ) on your PC as in the figure above. ƒ The LED will blink red while the battery is being charged. When done, it turns green. ƒ When you need to recharge the battery. NOTE - When the battery is too low, the LED blinks red and the color of the selected play mode alternately. If the LED is turned off, this will not work. - When the battery runs out, the LED blinks red. ƒ If you are charging the player while it is connected to a laptop computer, make sure the laptop's battery is also fully charged or that the laptop is plugged into its power source. the basics _ 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31

the basics
_ 11
Before you start -
Remove the earphones before connecting the direct connect USB adaptor.
±
When you need to recharge the battery.
-
When the battery is too low, the LED blinks red and the color of the selected play
mode alternately. If the LED is turned off, this will not work.
-
When the battery runs out, the LED blinks red.
If you are charging the player while it is connected to a laptop computer, make sure the
laptop’s battery is also fully charged or that the laptop is plugged into its power source.
±
±
CHARGING THE BATTERY
Charge the player before using it for the
rst time and when you haven’t used it
for a long time.
The battery for your mp3 player will fully charge in about 2 hours, although total
charging time varies depending on your PC environment.
1.
Connect the mini plug end (A) of the direct connect USB adaptor to the
Earphone/USB Connection Jack of the player.
2.
Connect the wide (USB) end (B) of the direct connect USB adaptor to the
USB port
(
)
on your PC as in the
gure above.
The LED will blink red while the battery is being charged. When done, it turns green.
±
NOTE
(A)
(B)
1
2