Samsung YP-T5H Quick Guide (ENGLISH) - Page 1

YP-T5 Quick Guide Location of Controls Display Loop Repeating Button Recording Button Microphone Neck strap Hook MENU, Navigation button/ Move to Track/Speed Search/ Volume Button Play/Pause Button Hold Switch ENC Jack USB Cable Connection Port Earphone Jack Battery Cover Turning Power On and Off Playing Music ● Power On : Press the button to turn on the power. ● Power Off : Press and hold the button to turn off the power. Pausing Music Press the button. ● Playback starts. Press the button to pause playback. ● If no buttons are pressed within 10 seconds(changes depending on settings), the yepp automatically powers off. ● While in Pause mode, briefly press again to resume playback. 1 Connecting the USB cable ➤ Before connecting the yepp to PC, make sure to install USB driver. 1 Connect a USB cable to the USB port on the computer. 2 Connect the other end of a USB cable to the USB cable connection port on the bottom of the yepp, and press the button on the main unit. ● If you disconnect the USB cable from your PC while implementing a command or initializing during USB driver installation, your PC may not function correctly. 3 USB driver is installed with a message saying that it is searching for a new device. You may not see the display screen during installation. Go to the device manager to check that installation has been successfully completed. 4 Upon installation of the USB driver "SAMSUNG YP-T5" will appear in the [Start] → [Settings] → [Control Panel] → [System Properties] → [Device Manager]. 2 USB connect cable