SanDisk SDSDH-2048 Product Manual - Page 22
Table 3-2, SD Card Registers, SD Card Architecture
UPC - 710348911080
View all SanDisk SDSDH-2048 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Revision 2.2 Chapter 3 - SD Card Interface Description SD Card Product Manual Each card has a set of information registers (refer to Table 3-3). Detailed descriptions are provided in Section 3.5. Table 3-2 SD Card Registers Name CID RCA6 CSD SCR OCR Width 128 16 128 64 32 Description Card identification number: individual card number for identification. Relative card address: local system address of a card, dynamically suggested by the card and approved by the host during initialization. Card specific data: information about the card operation conditions. SD Configuration Register: information about the SD Card's special features capabilities. Operation Condition Register The host may reset the cards by switching the power supply off and on again. The card has its own power-on detection circuitry that puts the card into an idle state after the power-on. The GO_IDLE (CMD0) command can also reset the card. Figure 3-1 SD Card Architecture 6 The RCA Register is not available in SPI mode. © 2004 SanDisk Corporation 3-2 12/08/04