Sanyo 09KS71 Instruction Manual - Page 17
Setting the Timer
View all Sanyo 09KS71 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Setting the Timer NOTE In the descriptions below, the following settings are used for the temperature and time indicator selector button on the bottom front section of the remote control. • Temperature: °F • Time: AM, PM 1. How to set the present time (Example) To set to 10:30 pm. Operation 1. Press the CLOCK button once if the time indicator is not flashing. 2. Press the Advance, Return ( , ) button until PM 10:30 is displayed. 3. Press the CLOCK button again. Indication The time indication alone flashes. The time can be set in 1-minute increments. Holding down the button advances the time rapidly in 10-minute increments. This completes the setting of the current time. 2. How to set the OFF time (Example) To stop the air conditioner at 11:00 am. 1. Press the OFF TIME setting button once. 2. Press the Advance, Return ( , ) button until AM 11:00 is displayed. 3. Wait a few seconds, and then the setting is complete. The timer indication is displayed, and the present OFF time is shown. The timer indication blinks. The time can be set in 10-minute increments. Holding down the button advances the time rapidly in 10-minute increments. The timer indication stops blinking and the present time is displayed. OI-803-17-EG 17