Sanyo DS20425 Owners Manual - Page 8

USING THE REAR AUDIO / VIDEO INPUT JACKS CONNECTING A VCR OR OTHER EQUIPMENT Switch off TV and external equipment before connecting cables. (Cables are not supplied.) ‚ Connect VCR or other equipment's Audio Video Out to the TV Audio Video Input 2. For Mono VCR (Single Audio Jack) connect VCR Audio Out to TV Audio (L) Input 2. x OR Connect DVD Player or other equipment's S-Video Out and Audio Out to the TV S-Video and Audio In Jacks. Using the S-Video jack overrides the Video (AV2) jack. ƒ Press POWER to turn on the TV. Turn on external equipment also. „ To access Audio Video inputs, press the INPUT key to select VIDEO2. Note: Audio Video Input 2 (AV2) and Component inputs share the same audio (R/L) input jacks. Back View of VCR DVD Player Remote Control INPUT POWER RESET MENU „ RECALL CH ƒ IN R-AUDIO-L VIDEO OUT R-AUDIO-L VIDEO RF CHANNEL 34 IN FROM ANT. VHF/UHF TO TV OUT ‚ Rear TV AV Input Jacks AUDIO OUT L R VIDEO OUT VIDEO OUT SELECT COMPONENT VIDEO OUT COAXIAL S-VIDEO COMPONENT Y DIGITAL OUT S-VIDEO OUT PB/CB PR/CR xx COMPONENT AUDIO VIDEO UHF/VHF/CATV 2 INPUT 2 75Ω What you will need for connections: Y VIDEO ‚ AV Cable - 1 PB L OPTIONAL CONNECTION x S-Video Cable - 1 x Audio Cable - 1 ‚ PR R S-VIDEO x x I Make sure all cable connectors are fully seated on jacks. I Always match A/V cables according to the colors; red for right audio, white for left audio, and yellow for video. I Press INPUT key after connecting cables to access the A/V inputs. There is NO need to tune to a blank channel. I A solid Blue screen with the word VIDEO2 displayed, means that the Video mode is selected, but no signal is being detected at the Video jacks. Check connections, turn on external equipment. 8 Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032