Sanyo DVD-SL33 Instruction Manual - Page 13

Notes: • For VIDEO connection, please refer to "BASIC CONNECTIONS". • Please refer to the instruction manual of your amplifier. • When you connect the DVD video player to your amplifier, be sure to turn off the power and disconnect both units from the wall outlet until all the connections have been made. Connecting to an Amplifier with Dolby Digital Decoder, DTS Decoder or MPEG2 Decoder (Example 4) Amplifier with Dolby Digital Decoder, DTS Decoder or MPEG2 Decoder To digital audio input *Coaxial cable (not supplied) Center speaker To COAXIAL DIGITAL OUT jack Front left speaker Surround left speaker Front right speaker Subwoofer Surround right speaker To enjoy Dolby Digital sound Select "Dolby Digital BitStream" in "Setting Digital Out" on the INITIAL SETTINGS. (See page E31.) To enjoy DTS sound Select "DTS On" in "Setting Digital Out" on the INITIAL SETTINGS. (See page E31.) To enjoy MPEG2 sound Select "MPEG BitStream" in "Setting Digital Out" on the INITIAL SETTINGS. (See page E31.) Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic" and the double-D symbol are trademarks of Dolby Laboratories. "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc. Connecting to a Digital Amplifier (Example 5) You can enjoy 2 Channel Digital Stereo Sound. Amplifier with an optical digital input To digital audio input *Coaxial audio cable (not supplied) To COAXIAL DIGITAL OUT jack Front left speaker Front right speaker To enjoy 2 Channel Digital Stereo sound Select "Dolby Digital LPCM", "MPEG LPCM", and "DTS Off" in "Setting Digital Out" on the INITIAL SETTINGS. (See page E31.) Note: If "DTS On" is selected, loud noise will occur. (See page E31.) -E12- *Please consult your local audio/video dealer. DVD-SL33/CA(English) 13 13/06/2003, 10:06