Sanyo Dwm450 Instruction Manual - Page 16

BASIC OPERATION Preparations • Turn on the power (TV, Audio System, AV amplifier, etc.). • Select the video input source on your television. (Please refer to your TV instruction manual.) TV VIDEO 1 Basic Playback Notes: • Do not touch the disc tray while it is moving. • Never place anything except a disc on the disc tray. For- eign objects can damage the unit. • Do not apply excessive force to the disc tray. • Only one disc must be placed on the disc tray at a time. When operation buttons are pressed, that operation is displayed on the TV screen. The display turns off after several seconds. • Select the playback picture size according to the aspect ratio of the TV. (For more details, see "Setting Display" on page E32.) 4:3 LB (Letterbox): 4:3 PS (Panscan): 16:9 : • Select the audio input source (Audio System, AV amplifier, etc.). • When you use TV with Progressive-scan capability and connect it to the COMPONENT VIDEO OUT jacks of the DVD video player (see page E10), you must select the PROGRESSIVE mode. (For more details, please refer to your TV instruction manual.) Note: If you use a Conventional TV, skip this section. 1. Turn on the power (TV and DVD video player). 2. In "NO DISC" mode, press and hold down [a] on the DVD video player until " " (PROGRESSIVE) appears briefly on the TV screen. If you want to change the setting again, press and hold down [a] on the DVD video player until " " (INTERLACE) appears briefly on the TV screen. Note: In " " mode, the closed caption may not appear on the TV screen. Disc tray q a z/ON z/ON ON z SLOW PREV f REV d OPEN/CLOSE q k STOP n P L AY a NEXT e FWD c 1 2 3 4 5 6 7 8 9 PROGRAM +10 0 AUDIO SUBTITLE RANDOM Z O O M SETUP MENU OPEN/ CLOSE PLAY 1. Press [z/ON]. • "SANYO" logo appears on the TV screen. • The power indicator lights on the front panel. 2. Press [q] (or [ q OPEN/CLOSE] on the remote control). • "q" appears on the TV screen and the disc tray opens. • The DISC IN indicator blinks on the front panel. Note: To open or close the disc tray, be sure to press [q] (or [ q OPEN/CLOSE] on the remote control). Do not push back the disc tray by your hand. 3. Place the disc with the label facing up on the disc tray. Important Note: • This instruction manual explains the basic instruction of this unit using the remote control. • Some DVD video discs have different functions that may not be explained in this instruction manual. You may need extra instruction. In this case, please follow the instructions displayed on the TV screen or jacket or case of the disc. • " " may appear on the TV screen during operation. This icon means that the function is not available on the disc now. For 5-inch (12cm) disc -E15- or For 3-inch (8cm) disc