Sanyo FW32D08F Owners Manual - Page 22

Sound Before you begin: You must set Location to Home. L p. 30 Otherwise, personalized picture and sound settings will not be memorized after the unit goes into standby mode. 1 Press MENU and use H I to select Sound, then press OK. Picture Sound Setup Features Language USB Auto sound Equalizer Virtual surround sound Auto volume leveling TV speakers Digital output format Primary MTS Standard On Off On Multichannel Stereo 22 .English You can select audio output through a digital audio output connector. Digital output format To output multichannel signals Multichannel (When the audio of the content is PCM, it will be output in PCM even if Multichannel is selected.) PCM To output PCM format You can set the output mode as a default for the sound mode (Analog TV only). This setting is not interlocked when you change the output mode by pressing SAP. Refer to Switching audio mode. L p. 17 Stereo To output stereo audio Primary MTS Mono To output mono audio SAP To output second audio program Note(s) ● When Digital output format is configured for Multichannel output while content with Multichannel audio is being played, Voice guide ( L p. 24) is not contained in the output. 2 Use H I J K to select the item you want to adjust, then press OK. Auto sound To select the desired setting, then press OK. (Personal, Standard, Vivid, Sports, Movie, Music or News) When you adjust the following settings (Equalizer, Virtual surround sound or Auto volume leveling), Personal sound will be set automatically when Location is set to Home. Adjust the tonal quality for each frequency. Equalizer Cursor I Cursor H To adjust each level of tonal quality. Press BACK to go back to the previous menu. Virtual surround sound gives you the stereophonic virtual space through your existing 2-channel stereo system. Virtual surround sound Off Natural effect On Emphasized effect This function keeps a constant loudness level between the TV commercials and the programs. Auto volume leveling Off To remove the Auto volume leveling To reduce volume differences On between the TV commercials and the programs You can select the audio output from the unit's speakers or not. If your amplifier is HDMI link function compatible and connected by an HDMI cable to this unit, some sound operations such as volume up can be changed by using this unit's remote control. On To output sound from the unit's speakers TV speakers Off CEC Link No output sound from the unit's speakers To control audio output from your connected HDMI-CEC compliant devices with VOL + / - by using this ynit's remote control. Continued on next page.