Sanyo FW40D36F Owners Manual - Page 10

Control Panel 1 2 3 4 5 Terminals 9 10 11 12 678 14 15 13 10 .English a B (POWER / STANDBY) Turns the TV On from Standby or Off to Standby mode. b SOURCE Selects Connected Devices. c MENU Opens the Main On-screen Menu. d CH H / I Selects a Channel in the Memorized Channel Ring (Low to High or High to Low). In the Menu screen, moves the Cursor Up ( H ) (+) / Down ( I ) (-). e VOL J / K Adjusts the Volume. VOL J (-) : Volume Down VOL K (+) : Volume Up In the Menu screen, moves the Cursor Left ( J ) (-) / Right ( K ) (+). f Remote Control Sensor Receives IR Signal from Remote control. Do Not Block this Remote Control Sensor window to allow proper operation. g Ambient Light Sensor Alters the brightness of the TV screen Automatically by detecting your room lighting level. Do Not Block this Light Sensor window to allow proper operation. h Power On / Standby Indicator (On : no light, Standby : red light) i Component (Y/Pb/Pr) / Composite Video (VIDEO) Input jack(s) for VIDEO Composite Video Input (VIDEO) jack is a shared jack with Component Video Input (Y) jack. j Analog Audio (L/R) Input jacks Connect Analog Audio Signals from; ● HDMI-DVI / Analog Audio (L/R) jacks Signal ● Component Video / Analog Audio (L/R) jacks Signal ● Composite Video / Analog Audio (L/R) jacks Signal ● PC Connection / Analog Audio (L/R) jacks Signal from Stereo Mini 3.5mm Plug Audio Cable on PC. k Digital Audio Output jack Digital Audio (S/PDIF) Output to Home Theaters and other Digital Audio systems. l HDMI Input jack(s) Digital Audio and Video Input from High-Definition Digital Devices such as DVD / Blu-ray Disc players, Cable or Set-top Boxes and PC's. m USB Terminal Data Input from USB Memory Stick only. Do Not Connect any Device to this terminal such as; Digital Camera, Keyboard, Mouse, etc. n 75 ohm Cable / Antenna Connection Signal Input from an Antenna, Cable or Set-top Boxes. o Headphone Audio Output jack Headphone 3.5mm Stereo jack for personal listening. Continued on next page.