Sanyo FWBP506FF Owners Manual - Page 43

Problem T ip No return to start-up screen when disc is removed. Soft reset this unit by turning it Off for 30 seconds, then On again. To completely reset the unit, press and hold [ (POWER-ON/Standby)] on the front panel for 10 seconds to shut down the unit or unplug the AC power cord from the AC outlet for 5-10 seconds. in the upper right hand corner of the TV screen. The operation is not possible. Buttons do not work or the unit stops responding. To soft reset the unit, press and hold [ (POWER-ON/Standby)] on the front panel for 10 seconds to shut down the unit or to hard reset the unit by unplugging the AC power cord from the AC outlet for 5-10 seconds. The unit does not respond to The operations may be prohibited by the disc. Refer to the instructions some operating commands during for the disc. playback. The unit cannot read Blu-ray Disc™ / DVD/ CD. Condensation? (Let sit 1 or 2 hours) Check to see if the disc is compatible with this unit. (Refer to page 17.) Wipe dirt off the disc from the center to the outside or replace the disc. Refer to ˝Cleaning Discs˝ on page 47. Scene shooting Angle does not switch. Angles cannot be switched for Blu-ray Disc™ / DVD which do not contain multiple Angles. In some cases multiple Angles are only recorded for specific scenes. Playback does not start when a Title is selected. Check the settings in ˝Parental˝ menu. The password for rating level has Enter the default password ˝4737˝, then your forgotten password will be been forgotten. cleared. Then to change password go to ˝Password Change˝ on page 39. Error message appears when I select ˝Auto˝ in the ˝Language˝. Make sure that the unit is connected to a TV that is compatible with HDMI CEC and the ˝HDMI CEC˝ is set to ˝On˝. This error message may appear when your TV's OSD language is not supported by this unit. Cannot play back AVCHD file. This unit cannot play back stand-alone AVCHD files (*.m2ts, *.mts or *.m2t) written to a DVD. The DVD containing AVCHD files must have a proper file and folder structure meeting AVCHD format specifications. Please use AVCHD compliant device / software to burn or copy AVCHD files to DVD. (Please refer to user manuals of the device / software for more information.) The capacity of the USB Memory Stick decreased. Data may be written on the USB Memory Stick when a BD-Video uses the Virtual Package feature while a USB Memory Stick is connected to the unit. Cannot play back a MPEG-2 video and audio from the USB Memory Stick. MPEG-2 is not compatible with this unit. Cannot read the contents on the USB Memory Stick. The USB Memory Stick is not compatible with this unit or the contents may be damaged. Try and Turn Off the unit, then turn it back On. To soft reset the unit, press and hold [ (POWER-ON/Standby)] on the front panel for 10 seconds to shut down the unit or to hard reset the unit by unplugging the AC power cord from the AC outlet for 5-10 seconds. Cannot play back BD-Video. Connect a USB Memory Stick (256MB or more of available memory) which is formatted on this unit. Some discs require memory when playing back the content. Do not disconnect the USB Memory Stick during playback. Cannot use BD-Live. BD-Live function cannot be performed because this unit does not connect the Internet. Cannot play back in 3D. Some discs may not be played back because this unit does not support 3D. Cannot load a Blu-ray Disc™ (stuck Unplug unit from AC outlet for 20 seconds. Plug unit back in and press in ˝Loading...˝ mode) and cannot the [ (OPEN/CLOSE)] on the unit to Eject the disc. Open the disc tray to Eject the disc. continued on next page EN 43