Sanyo FXCD-550 Owners Manual - Page 9

Bassxpander Basx - 1/2, Radio Selection Button Bnd, Tape Selection Button Tape, Cd Selection Button

Page 9 highlights

BASSXPANDER (BASX) - 1/2 4 BASSXPANDER is a dual-mode sound equalization feature. Press button to select the BASSXPANDER mode as follows; b-1 b-2 OFF BASSXPANDER offers two preset mode: b-1 enhances the low and high frequencies, while b-2 enhances the low frequencies and reduces the high frequencies. RADIO SELECTION BUTTON (BND 5 Press the BND button to switch from CD player, or tape mode to radio. Each time the button is pressed, the function changes as shown below. FMI FMII AM TAPE SELECTION BUTTON (TAPE 6 Press the TAPE button with a tape slot to switch from radio or CD player mode to tape mode. CD SELECTION BUTTON (CD 7 Press the CD button with a CD slot to switch from radio or tape mode to CD player mode. CLOCK BUTTON (DISP 8 Press the DISP button to switch between the clock and audio display. When an audio function is performed while the time display is selected, the audio display will appear for 5 seconds, then the display will return to the time mode. TO CANCEL THE BEEP TONES 1, 2 1 To cancel the beep tones, press the SEL button and ON/OFF button simultaneously until "b : OFF" is displayed. 2 To turn on the beep tones again, perform the same procedure. The beep tones are set and "b : On" is displayed. -8-

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27

-8-
BASSXPANDER (BASX) - 1/2
.....................................
4
BASSXPANDER is a dual-mode sound equalization feature. Press button
to select the BASSXPANDER
mode as follows;
BASSXPANDER offers two preset mode: b-1 enhances the low and high frequencies, while b-2 enhances
the low frequencies and reduces the high frequencies.
RADIO SELECTION BUTTON (BND)
...........................
5
Press the BND button
to switch from CD player, or tape mode to radio.
Each time the button is pressed, the function changes as shown below.
TAPE SELECTION BUTTON (TAPE)
............................
6
Press the TAPE button
with a tape slot to switch from radio or CD player mode to tape mode.
CD SELECTION BUTTON (CD)
...................................
7
Press the CD button
with a CD slot to switch from radio or tape mode to CD player mode.
CLOCK BUTTON (DISP)
............................................
8
Press the DISP button
to switch between the clock and audio display. When an audio function is
performed while the time display is selected, the audio display will appear for 5 seconds, then the display
will return to the time mode.
TO CANCEL THE BEEP TONES
.................................
1, 2
To cancel the beep tones, press the SEL button
and ON/OFF button
simultaneously until
b : OFF
is displayed.
To turn on the beep tones again, perform the same procedure. The beep tones are set and
b : On
is
displayed.
b-1
b-2
OFF
1
2
FMI
FMII
AM