Sanyo HD2000 Instruction Manual, VPC-HD2000EX - Page 56
Close the camera's monitor unit, and set the camera in the docking, station.
UPC - 086483060502
View all Sanyo HD2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
PREPARING THE POWER 5 Close the camera's monitor unit, and set the camera in the docking station. h Set the camera securely, making sure that the camera is correctly oriented in relation to the terminal contacts in the docking station. h Charging begins when the camera is set in the docking station. h During charging, the multiindicator is lit red. When charging is completed, the indicator turns off. h If the multi-indicator flashes red, it indicates that the battery pack is defective or the camera is not correctly set in the docking station. Reset the camera correctly in the docking station. h The charging time is approx. 200 minutes. h Charging is executed when the battery temperature is approximately 0 to 35 °C (32 to 95 °F). If the battery temperature exceeds 35 °C (95 °F), the safety mechanism will operate to automatically interrupt charging. The multi-indicator flashes red in this case also. After the battery cools down, charging begins again, and the multi-indicator lights red. h The AC adaptor (supplied) can be connected to the camera's DC IN terminal to charge the battery. Multi-indicator Docking station terminal 35 English