Sanyo PDG-DET100L Instruction Manual, PDG-DET100L - Page 50
Background, Lamp control, Lamp mode, Lamp interval, 200H/500H/1000H/2000H.
UPC - 086483074684
View all Sanyo PDG-DET100L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Setting Background The selected background screen will be displayed when no input signal is detected. Blue Blue colored background. User The image you captured. Black Black colored background. Lamp mode This projector is equipped with 2 projection lamps and the number of using lamps can be switched to 2 lamps or 1 lamp. Using 1 lamp maintains the life of projection lamps. Press the SELECT button at Lamp mode to display a dialog box. Use the Point ed buttons to select "2-Lamps", "Lamp1" or "Lamp2" and press the SELECT button. Then the confirmation message appears. Select [Yes] and press the SELECT button. 2-Lamps ��� Two lamps turn on. Lamp1 Only Lamp1 turns on. Lamp2 Only Lamp2 turns on. Lamp control Lamp control This function allows you to change brightness of the screen. Normal Normal brightness. Eco 1 Lower brightness and Fan speed decrease. Lower brightness reduces the lamp power consumption and extends the lamp life. Eco 2 Lower brightness and Fan speed increase. Lower brightness reduces the lamp power consumption and extends the lamp life. It is recommended to use Eco 2 when using the projector continuously over a long period of time. Lamp life control Select the lamp operation when the total lighting time of a lamp exceeds the recommended total hours of use. Mode 1 A lamp can be turned on even after exceeding the recommended total hours of use. Mode 2 A lamp is not turned on after exceeding the recommended total hours of use. Lamp interval This function can be used to automatically switch the lamp that is turned on after a certain period of time in order to reduce the lamp deterioration when 'Lamp1' or 'Lamp2' has been selected in 'Lamp mode' setting. Use the Point 7 8 buttons to select from (Off/Auto/24H/ 200H/500H/1000H/2000H). 50 ✔Note: •"User" cannot be selected when the image is not captured. ✔Note: • When switching from one of lamps to the other (e.g. when switching from Lamp1 to Lamp2), both lamps will light until the brightness of the lamps are stabilized. • When neither of the two lamps is lighted, the projector will shutdown automatically. • When either of the two lamps does not light up, the LAMP 1/2 REPLACE indicator blinks orange and the projector will light the other automatically. (X mark will appear on the unlighted lamp in the Lamp Status Display. See page 65 for details.) ✔Note: • The fan noise becomes louder in Eco 2 than in Eco 1. Select the suitable mode for the used environment. ✔Note: • If Mode 2 has been selected and either of two lamps exceeded its recommended total hours of use, Lamp interval mode will be fixed to 'Off'. Also, '2-Lamps' icon in the Lamp mode and the icon of lamp which exceeded its recommended total hours of use will be displayed in grayout. • If Mode 2 has been selected and both lamps exceeded the recommended total hours of use, the warning icon will be displayed at the time of power-on. Then the projector will turn off after 3 minutes. ✔Note: • When either of the two lamps is out, the projector will light the other automatically even if 'Off' is selected. • When 'AUTO' is selected, the projector automatically detects which lamp is used less often than the other at the time of power-on and lights it. • The setting values of time interval may not be accurate, and should be used only as a guide.