Sanyo PDG-DHT8000L Owners Manual - Page 40

Computer Input Screen Size Adjustment Select the desired screen size that conforms to the input signal source. 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Screen Menu icon. 2 Use the Point ed buttons to move the red frame pointer to the desired function and then press the SELECT button. Normal Provide the image at the normal computer aspect ratio of 4:3. SCREEN MENU Screen Menu icon Move the red frame pointer to the desired function and press the SELECT button. Zoom Scale the image proportionally to fit the entire screen. Either side of image may go over the screen. True Provide the image in its original size. When the original image size is larger than the screen size (1920 x 1080), the projector enters to the panning mode automatically. Use the Point ed7 8 buttons to pan the image. When adjusted, the arrows will turn red. When reached to the correction limits, the arrows will disappear. Full Provide the full screen image. Custom Adjust the screen scale and position manually with this function. Press the SELECT button at Custom and the "Custom" is displayed on the screen for a few seconds. To display the Aspect dialog box, press the SELECT button at Custom again and then the Aspect dialog box appears. ✔Note: •True, Full, and Digital zoom +/- cannot be selected when no signal is detected in the PC System Menu. (p.35) •The projector cannot display the resolution higher than 1920 x 1200. If your computer's screen resolution is higher than that, lower the resolution before connecting the projector. •The image data other than 1920 x 1080 dots are modified to fit the screen size in initial mode. •The panning function may not operate properly if the stored Mode in the PC Adjust Menu is used. (p.38) Scale H/V Adjust the Horizontal/Vertical screen scale. H&V When set to "On," the aspect ratio is fixed. The "Scale V" appears dimmed and becomes unavailable. Adjust "Scale H," then the screen scale is automatically modified based on the aspect ratio. Position H/V.......... Adjust the Horizontal/Vertical screen position. Common Save the adjusted scale to all the inputs. Press the SELECT button at Common to display a confirmation box. To save the scale, press the SELECT button at "Yes." When Custom is selected, the saved scale is used. Reset Reset the all adjusted values. Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at "Yes." Press the SELECT button at Common or Reset, to display a confirmation box. ✔Note: •When no signal is detected, "Normal" is set automatically and the Aspect dialog box disappears. •The adjustable range for Scale H/V and Position H/V is limited depending on the input signal. 40