Sanyo PLC-ET30L RS232C Expand - Page 18
CF_COLTEMP Command, 4.9 CF_NZRED Command, 4.10 CF_PROGV Command, 4.11 CF_IMAGE Command
UPC - 086483069925
View all Sanyo PLC-ET30L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
PLC-ET30L Expand Serial Command Functional Specifications 8.4.8 CF_COLTEMP Command Command "CF_COLTEMP_%1" [CR] "000 Xlow %1 "001 Low "002 Mid "003 High Details Response Set Color Temperature (Available only in the normal Power ON status) The value set by this command will not be stored in the projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns to the original setting. (It is stored in Suspend mode.) Acceptable "000" [CR] Unacceptable "Error Code" [CR] 8.4.9 CF_NZRED Command Command "CF_NZRED_%1" [CR] "OFF Cancel Noise Reduction "L1 Set Noise Reduction L1 %1 "L2 Set Noise Reduction L2 "UP Toggle between ON and OFF. (OFF→L1→L2→OFF...) "DN Toggle between ON and OFF. (OFF→L2→L1→OFF...) Details Set Noise Reduction level (Available only in the normal Power ON status) The value set by this command will not be stored in the projector's memory Therefore, when the power is turned to ALL OFF status, the value returns to the original setting. (It returns to the original setting in Suspend mode as well.) Acceptable "000" [CR] Response Unacceptable "Error Code" [CR] 8.4.10 CF_PROGV Command Command "CF_PROGV_%1" [CR] "OFF Set Progressive scan to OFF. "L1 Set Progressive scan to L1(for movie image). %1 "L2 Set Progressive scan to L2(for still image). "FILM Set Progressive scan to Film. "UP Switch setting forward direction (OFF→L1→L2→FILM→OFF) "DN Switch setting backward direction (OFF→FILM→L2→L1→OFF) Details Set Progressive scan mode. (Available only in the normal Power ON status) The value set by this command will not be stored in the projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns to the original setting. (It is stored in Suspend mode.) Acceptable "000" [CR] Response Unacceptable "Error Code" [CR] 8.4.11 CF_IMAGE Command Command "CF_IMAGE_%1" [CR] "DYNAMIC" ---Dynamic (Fixed value to enable projection with a sharp, powerful picture tone) "STAND" -------Standard(Image adjust value is set to factory default for Still Image) "REAL---------- Real (Fixed value to display graphic image with natural tone) %1 "CINEMA"----- Cinema (Fixed value to focus on tone reproduction for movie) "CUSTOM1 Image1 the value adjusted and stored by user "CUSTOM2 Image2 the value adjusted and stored by user "CUSTOM3 Image3 the value adjusted and stored by user 18/62