Sanyo PLC-WL2503 RS232C Basic - Page 16
Direct on Setting Command
UPC - 086483079627
View all Sanyo PLC-WL2503 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
PLC-WL2500/WL2501/ WL2503 Basic Serial Command Specifications 6.34. IMAGE (Toggle) Command Command "C27"[CR] Detail Switch Image Setting status. This command works the same as "IMAGE" button of the remote control. Acceptable Response [ACK] [CR] Unacceptable " "[CR] 6.35. Direct on Setting Command Command "C28" [CR] Detail Enable Direct on. This status is stored in EEPROM and retained regardless of Power OFF/ON. Acceptable Response [ACK] [CR] Unacceptable " "[CR] 6.36. Direct on Cancel Command Command "C29" [CR] Detail Disable Direct on. This status is stored in EEPROM and retained regardless of Power OFF/ON. Acceptable Response [ACK] [CR] Unacceptable " "[CR] 6.37. Power Management Ready Command Command "C2A" [CR] Detail Set Power Management to Ready mode. This status is stored in EEPROM and retained regardless of Power ON/OFF. Acceptable Response [ACK] [CR] Unacceptable " "[CR] 6.38. Power Management OFF Command Command "C2B" [CR] Detail Set Power Management to OFF mode. This status is stored in EEPROM and retained regardless of Power ON/OFF. Acceptable Response [ACK] [CR] Unacceptable " "[CR] 6.39. Power Management Shut down Command Command "C2E" [CR] Detail Set Power Management to Shut down mode. This status is stored in EEPROM and retained regardless of Power OFF/ON. Acceptable Response [ACK] [CR] Unacceptable " "[CR] 16/25