Sanyo PLC-XD2200 Brochure PLC-XD2200 - Page 2

PLC-XD2600, PLC-XD2200 - cost

Page 2 highlights

Easy Setup Easy to Use PLC-XD2600 / XD2200 provides a "Auto Setup Function" that does auto keystone correction by searching for an input signal and detecting projector incline, reducing setup time. Furthermore, the "Screen Guidance Function" allows projector set up according to the displayed guidance. This function provides an easy guide to using the projector. The projector can be turned off by unplugging the cable without pressing the power button. You can pack up and leave quickly. Environment friendly power consumption in standby mode (Eco): 0.4 W SANYO's first ecological data projector with 0.4 W standby power consumption. By redesigning electrical circuits, a standby power consumption savings of about 80% was achieved compared to a conventional model. XD2600 / XD2200 Wired LAN (RJ-45) for projector control This model is equipped with Wired LAN (RJ-45) that allows you to manage and control projector via Network. It is possible to check the operating time of lamp and manage the warning notification by Email. Power ON/OFF and switching of input signal can be controlled. You can save a lot of time without manage and control. Light Weight and Compactness for Greater Portability The compact design (13.1 x 3.4 x 9.7 inch) and light weight body (5.7 lbs) let you make presentations almost anywhere. Bright Images Even In a Well-Lit Room The PLC-XD2600 provides outstanding brightness of 2,600 lumens, while the PLC-XD2200 delivers 2,200 lumens of brightness. Ultra-Long Unfailing Lamp: 6000H (eco) The PLC-XD2600/2200 allows saving your total cost of ownership with equipping ultra long life lamp. This lump enable to be used 6000H with eco mode in idea condition. Other Features • D-sub 15pin for Input (VGA), D-sub 15pin for Input or Monitor out • 18 languages (Operation menu) • Color board (4 color) mode, Security: PIN code lock, Key lock Specifications Model name Panel Resolution Lamp wattage Brightness (Lamp mode: "High" & Image mode: "Dynamic")*1 Contrast *1 Uniformity *1 Projection lens Screen Size Zoom / Focus SD/HDTV signals Color systems Video Signal Computer Terminal Video Terminal Computer compatibility Audio Communication Terminal Presentation Tool Other Features Scanning frequency Sound output Fan Noise Voltage Power consumption Standby Power consumption Dimensions (W x H x D) Weight Lamp Life*3 (hours Normal/Eco) Included accessories PLC-XD2600 PLC-XD2200 0.55 inch TFT p-Si x 3 1024 x 768 215 W UHP 2600 lm 2200 lm 500:1 85% (corner to center) F2.0 - 2.15 f=0.72 - 0.87 inch 40" - 300" (4.3 - 38.7 ft) (10.8 - 12.8 ft) 1:1.2 Manual driven 480i, 480p, 575i, 575p, 720p, 1035i, 1080p PAL / SECAM / NTSC / NTSC4.43 / PAL-M/N Composite, S-Video, Component Dsub-15 x 1: Analog RGB Input (Component and S-video input with conversion cable), D-sub15 x 1: AnalogRGB Input or Monitor out *2 RCA x 1: Composite video UXGA / WXGA / SXGA / XGA / SVGA / VGA / MAC Mini-Jack (stereo) x 1: Input (for Computer & Video), RCAx2 (R,L), Mini-Jack (stereo) x 1: Output (variable) RJ-45 (LAN), Dsub-9pin (RS 232C) Freeze / Digital Zoom / No Show / etc Progressive, 3-2 & 2-2 pull down, User Logo H sync 15 - 100 kHz, V sync 50 - 100 Hz Dot clock 140 MHz 1.0 W Mono 29 dBA (Lamp mode "Eco") AC100-120V, AC 200-240V, 50/60Hz 100-120 V AC, 192 W (Eco) / 266 W / 284 (High) 100-120 V AC, 186 W (Eco) / 230 W / 261 (High) 100-120 V 0.4 W (Standby mode: Eco) 200-240 V 0.7 W (Standby mode: Eco) 13.1 x 3.4 x 9.7 inch 5.7 lbs 6000H (Eco) Quick reference guide, Owner's manual (CD-ROM), CD-ROM read me note, CD-ROM (PJ-Net Manager application software), PIN code Label, Lamp replacement label, UL cable card, Power cord, Computer cable (Dsub 15-Dsub15), Remote control, AAA Battery x 2, Lens cap Replacement Lamp Type No.: 610 349 7518 *1 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *2 For analog signal only, limitations on certain output signals. Does not support all types of input signals. * Specifications as of April 2010, subject to change. *3 Lamp life may vary due to room conditions, usage, and maintenance. The replacement time is a general estimate. The brightness of a lamp usually decreases over time and use. * All product names and company names are trademarks or registered trademarks of their respective companies. PLC-XD2600 PLC-XD2200 SANYO Presentation Technologies Toll free: 888-337-1215 www.sanyoprojectors.com © 2010 SANYO North America Corporation.

  • 1
  • 2

Replacement Lamp Type No.:
610 349 7518
*1 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*2 For analog signal only, limitations on certain output signals. Does not support all types of input signals.
* Specifications as of April 2010, subject to change.
*3 Lamp life may vary due to room conditions, usage, and maintenance. The replacement time is a general estimate.
The brightness of a lamp usually decreases over time and use.
* All product names and company names are trademarks or registered trademarks of their respective companies.
SANYO Presentation Technologies
©
2010 SANYO North America Corporation.
Toll free:
888-337-1215 www.sanyoprojectors.com
PLC-XD2600 / XD2200 provides a “Auto Setup Function”
that does auto keystone correction by searching for an
input signal and detecting projector incline, reducing setup
time. Furthermore, the “Screen Guidance Function” allows
projector set up according to the displayed guidance. This
function provides an easy guide to using the
projector. The projector can be turned off by
unplugging the cable without pressing the power
button. You can pack up and leave quickly.
SANYO’s first ecological data projector with 0.4 W standby power
consumption. By redesigning electrical circuits, a standby power
consumption savings of about 80% was achieved compared to a
conventional model.
This model is equipped with Wired LAN (RJ-45) that allows you to manage
and control projector via Network. It is possible to check the operating time of
lamp and manage the warning notification by Email. Power ON/OFF and
switching of input signal can be controlled. You can save a lot of time without
manage and control.
The compact design (13.1 x 3.4 x 9.7 inch) and light weight body (5.7 lbs) let
you make presentations almost anywhere.
The PLC-XD2600 provides outstanding brightness of 2,600 lumens, while the
PLC-XD2200 delivers 2,200 lumens of brightness.
The PLC-XD2600/2200 allows saving your total cost of ownership with
equipping ultra long life lamp. This lump enable to be used 6000H with eco
mode in idea condition.
• D-sub 15pin for Input (VGA), D-sub 15pin for Input or Monitor out
• 18 languages (Operation menu)
• Color board (4 color) mode, Security: PIN code lock, Key lock
Easy Setup Easy to Use
Environment friendly power consumption in standby mode
(Eco): 0.4 W
Wired LAN (RJ-45) for projector control
Light Weight and Compactness for Greater Portability
Bright Images Even In a Well-Lit Room
Ultra-Long Unfailing Lamp: 6000H (eco)
Other Features
PLC-XD2600
PLC-XD2200
Specifications
Model name
PLC-XD2600
PLC-XD2200
Panel
0.55 inch TFT p-Si x 3
Resolution
1024 x 768
Lamp wattage
215 W UHP
Brightness (Lamp mode:
“High” & Image mode: “Dy-
namic”)
*1
2600 lm
2200 lm
Contrast
*1
500:1
Uniformity
*1
85% (corner to center)
Projection lens
F2.0 - 2.15
f=0.72 - 0.87 inch
Screen Size
40” - 300” (4.3 - 38.7 ft)
Zoom / Focus
(10.8 - 12.8 ft) 1:1.2 Manual driven
SD/HDTV signals
480i, 480p, 575i, 575p, 720p, 1035i, 1080p
Color systems
PAL / SECAM / NTSC / NTSC4.43 / PAL-M/N
V
ideo Signal
Composite, S-
V
ideo, Component
Computer Terminal
Dsub-15
x 1: Analog RGB Input
(Component and S-video input with conversion cable),
D-sub15 x 1: AnalogRGB Input or Monitor out
*2
V
ideo Terminal
RCA x 1: Composite video
Computer compatibility
UXGA / WXGA / SXGA / XGA / S
V
GA /
V
GA / MAC
Audio
Mini-Jack (stereo) x 1: Input (for Computer &
V
ideo),
RCAx2
(R,L), Mini-Jack (stereo) x 1: Output (variable)
Communication Terminal
RJ-45 (LAN), Dsub-9pin (RS 232C)
Presentation Tool
Freeze / Digital Zoom / No Show / etc
Other Features
Progressive, 3-2 & 2-2 pull down, User Logo
Scanning frequency
H sync 15 - 100 kHz,
V sync 50 -
100 Hz
Dot clock 140 MHz
Sound output
1.0 W Mono
Fan Noise
29 dBA (Lamp mode “Eco”)
V
oltage
AC100-120
V
, AC 200-240
V
, 50/60Hz
Power consumption
100-120
V
AC,
192 W (Eco) / 266 W /
284 (High)
100-120
V
AC,
186 W (Eco) / 230 W /
261 (High)
Standby Power
consumption
100-120
V 0.4
W (Standby mode: Eco)
200-240
V 0.7
W (Standby mode: Eco)
Dimensions (W x H x D)
13.1 x 3.4 x 9.7 inch
Weight
5.7 lbs
Lamp Life*3
(hours Normal/Eco)
6000H (Eco)
Included accessories
Quick reference guide, Owner’s manual (CD-ROM),
CD-ROM read me note, CD-ROM (PJ-Net Manager
application software), PIN code Label, Lamp
replacement label, UL cable card, Power cord,
Computer cable (Dsub 15-Dsub15), Remote control,
AAA Battery x 2, Lens cap
XD2600 / XD2200