Sanyo PLC-XP21N Owners Manual - Page 29
NO Show Function, Freeze Picture Function, Auto Image Function, P-Timer Function
View all Sanyo PLC-XP21N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
BASIC OPERATION NO SHOW FUNCTION Press the NO SHOW button on the remote control unit. The screen will change into black image and the "NO SHOW" is displayed on the screen for a few seconds. This function is cancelled when the NO SHOW button is pressed again or any other function button is pressed. FREEZE PICTURE FUNCTION Press the FREEZE button on the remote control unit to freeze the picture on screen. This function is cancelled when the FREEZE button is pressed again or any other button is pressed. NOTE: Your computer or video equipment is not affected by this function, and will continue to run. AUTO IMAGE FUNCTION Press the AUTO IMAGE button on the remote control unit or on the projector. The item(s) indicated "ON" in the AUTO IMAGE FUNCTION are adjusted automatically. If all the items in AUTO IMAGE FUNCTION are "OFF", AUTO IMAGE SETTING display appears. If you wish to operate the AUTO IMAGE FUNCTION, perform the steps 3 - 9 of "AUTO IMAGE FUNCTION" section on page 38. NORMAL PICTURE FUNCTION The normal picture image level is factory preset on the projector and can be restored anytime by pressing the NORMAL button on the remote control unit or on the projector. The "Normal" display will be displayed on the screen for a few seconds. P-TIMER FUNCTION Press the P-TIMER button on the remote control unit. The timer display "00:00" appears on the screen and the timer starts to count the time (00:00 to 59:59). Press again the P-TIMER button to stop the timer. Then press the P-TIMER button to cancel the P-TIMER function. 29