Sanyo PLC XU115 Instruction Manual, PLC-XU115 Network Set Up, Mac - Page 104
Infrastructure Mode
UPC - 086483071393
View all Sanyo PLC XU115 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Chapter 9 Appendix Infrastructure Mode: When selecting LAN5 (factory default setting) Check each item below in the Wireless Setting menu of the projector as follows: *IP Address No setting is required. *Sub net Should be the same as the setting of the access point *Gateway Should be the same as the setting of the access point *Network Type Should be the Infrastructure mode *ESSID/SSID Should be same as the setting of the access point Check the settings for projector Client computer *IP Address No setting is required. Automatically set as DHCP. *Wireless Channel Should be 11 *ESSID/SSID Should be the same as the setting of the access point *WEP Should be disabled. *When LAN5 is used, it is necessary DHCP server is under the environment enabling those servers communicate through networks. Some access points may have the DHCP function. For detail of the settings, refer to the owner's manual for the devices or consult a system administrator of the network. Is the segment where the projector is installed different from the computer? Specify IP Address directly on the optional setting. Refer to "4. Wired LAN Configurations" ➔ "Confirming the Operation" (☞p.28-29). ■ Connection between computer and the projector via Wired LAN cannot be established. When selecting LAN1 (factory default setting) Check IP address, Sub net and Gateway of the projector and computer. For further details of the configuration, contact your system administrator. Is the segment where the projector is installed different from the projector? Specify IP Address directly on the optional setting. Refer to "4. Wired LAN Configurations" ➔ "Confirming the Operation" (☞p.28-29). ■ Cannot start up the browser Is the connection between PC and the projector with Network Capture 5 established? No Check settings for Wireless/Wired LAN. Yes Check settings of the proxy setting at browser. Refer to "Web browser setting" (p.98). 104