Sanyo PLC-XU300 Instruction Manual, PLC-XU300 Network Set Up - Page 46
Use of telnet, Windows XP Professional, Start, Mac OS X v 10.4, Terminal, Applications, Utilities
UPC - 086483073830
View all Sanyo PLC-XU300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Chapter 5 Appendix Use of telnet You can control the projector by using the telnet application*1 installed on your computer. Normally, the telnet application is available on your computer. * The telnet 10000 port is used to control the projector. Control (For example, in case of using the telnet application of Windows XP Professional.) 1. S elect Run... submenu from Start menu on the computer. Type "telnet" onto the Open text area on the displayed window and press OK button. (For example, in case of using the telnet application of Mac OS X v 10.4) 1. Select Terminal from Applications -->Utilities. Type as below on the displayed window. > telnet [return] 2. The telnet application will start and the following window will be displayed. Type as below to connect the projector. > open 192.168.1.201 10000 [return] *U se the IP address assigned to the projector. 46