Sanyo PLC-XU300A Owner's Manual Network Windows - Page 36
Image adjustment, Store
UPC - 086483076336
View all Sanyo PLC-XU300A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Chapter 4 Controlling the Projector Image adjustment This function is to adjust the projected picture image and save the image mode. To store the adjusted value, click Store button, and to load the adjusted value, click Load button. Item Description Contrast Adjusts picture contrast (0~ 63) Brightness Adjusts picture brightness (0~ 63) Color Adjusts picture color saturation (0~ 63) Tint Adjusts picture hue (0~ 63) Color temp Sets a color temperature mode. (X Low, Low, Mid, High, Adj.) White Balance Red, Green, Blue...... Adjusts each white balance respectively. (0~ 63) * When changing the value of the white balance, the color temp. indicates "Adj." Sharpness Adjusts picture sharpness. (0~ 15) Gamma Adjusts brightness of darker part of the picture. (0~ 15) Noise reduction S witches noise reduction mode (OFF, L1, L2) Progressive S witches progressive mode (OFF, L1, L2, Film) Reset Resets the Image adjustment to previous levels. Store Stores the Image adjustment values. Select an item [Image1 - Image4] from the pull-down menu and click Store button. Load Loads the Image mode. Select an image mode from the pull-down menu and click Load button. There may not be available mode depending on the input mode as shown in the table left. Input source Image mode Video Computer Dynamic 4 4 Standard 4 4 Cinema 4 * Real * 4 Blackboard(Green) 4 4 Colorboard 4 4 Image1 - 4 4 4 36 ✐ T he mark "4" means that the available image mode in the selected input source. The error message appears when selecting the disabled image mode indicated with "*".