Sanyo PLC XU50 Owners Manual - Page 21

Basic Operation No Show Function Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. When a projected image is captured and set as "User" in the Logo item in the Setting Menu (p38), the screen changes each time you press the NO SHOW button as follows. black out ➜ the captured image ➜ normal The message disappears after 4 seconds. P-Timer Function Press the P-TIMER button on the remote control. The timer display "00 : 00" appears on the screen and the timer starts to count time (00 : 00 ~ 59 : 59). To stop the P-Timer, press the P-TIMER button. And then, press the P-TIMER button again to cancel the P-Timer function. Sound Adjustment Direct Operation Volume Press the VOLUME (+/-) button on the top control or on the remote control to adjust volume. The volume dialog box appears on the screen for a few seconds. (+) button to turn up the volume and (-) button to turn down the volume. Mute Press the MUTE button on the remote control to cut off sound. To restore sound to its previous level, press the MUTE button again or press the VOLUME (+/-) button. indicates approximate level of volume. Press the MUTE button to set the Mute function On or Off. The display disappears after 4 seconds. Menu Operation 1 Press the MENU button and the On-Screen Menu will appear. Press the Point Left/Right button to move the red frame pointer to the Sound Menu icon. 2 Press the Point Down button to move the red frame pointer to the item that you want to select, and then press the SELECT button. Volume Press the Point Right button to turn up the volume, and press the Point Left button to turn down the volume. Sound Menu Sound Menu icon indicates approximate level of volume. closes the Sound Menu. Mute Press the Point Left/Right button to cut off sound. Dialog box display is changed to "On" and sound is cut off. To restore sound to its previous level, press the Point Left/Right button again. 21