Sanyo PLC-XU74 Owners Manual - Page 33
For zooming in and out the images, Digital zoom, Remote Control, Computer Input
UPC - 086483063664
View all Sanyo PLC-XU74 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Computer Input For zooming in and out the images Digital zoom + When the Digital zoom + is selected, the On-Screen Menu disappears and the message "D. zoom +" is displayed. Press the SELECT button to expand the image size. And press the Point ed 7 8 buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D.ZOOM e button on the remote control. Digital zoom - When Digital zoom - is selected, the On-Screen Menu disappears and the message "D. zoom -" is displayed. Press the SELECT button to compress image size. A projected image can be also compressed by pressing the D.ZOOM d button on the remote control. To exit the Digital zoom +/- mode, press any button except the D.ZOOM ed buttons, SELECT, and Point buttons. To return to the previous screen size, select a screen size from the Screen Size Adjustment or select an input source from the Input Source Selection (p.25) again, or adjust the screen size with the D.ZOOM ed buttons. Remote Control POINT buttons SELECT button D.ZOOM + button D.ZOOM - button ✔ Note: • The panning function may not operate properly if the stored Mode in the PC Adjust Menu is used. (p.29) • The minimum compression ratio can be limited depending on the input signal or when the Keystone function is working. • True, Full screen, and Digital zoom +/- cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p.26). • Digital zoom +/- cannot be selected when Full screen or True is selected. Computer Input 33