Sanyo PLC-XU75 Owners Manual - Page 13
Installation, Positioning the Projector, Adjustable Feet
UPC - 086483072925
View all Sanyo PLC-XU75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Installation Positioning the Projector For projector positioning, see the figures below. The projector should be set horizontally to the flat screen. ✔ Note: • The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain the best image. • The values shown below are approximate and may vary from the actual sizes. A:B = 9:1 34.4' (10.5 m) 23.0' (7.0 m) 17.0' (5.2 m) 11.5' (3.5 m) 4.6' (1.4 m) 100" 40" 83" 150" 126" 200" 166" 300" (Inch Diagonal) Max. Zoom 250" Min. Zoom A (Center) B Screen Size (W x H) mm 4 : 3 aspect ratio Zoom (min) Zoom (max) 40" 813 x 610 5.2' (1.6 m) 4.6' (1.4 m) 100" 2032 x 1524 13.8' (4.2 m) 11.5' (3.5 m) 150" 3048 x 2286 20.7' (6.3 m) 17.1' (5.2 m) 200" 4064 x 3048 27.6' (8.4 m) 23.0' (7.0 m) 300" 6096 x 4572 41.3' (12.6 m) 34.4' (10.5 m) Adjustable Feet Projection angle can be adjusted up to 10.0 degrees with the adjustable feet. 1 Lift the front of the projector and press the feet lock latches on both sides of the projector. 2 Release the feet lock latches to lock the adjustable feet and rotate the adjustable feet to adjust the position and tilt. 3 To retract the adjustable feet, lift the front of the projector and press and undo the feet lock latches. Keystone distortion of the projected image can be corrected by menu operation. (p.22, 42) Adjustable Feet Feet Lock Latches 13