Sanyo SU33 Instruction Manual, PLC-SU33

Sanyo SU33 - PLC SVGA LCD Projector Manual

Get Sanyo SU33 - PLC SVGA LCD Projector PDF manuals and user guides View all Sanyo SU33 manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo SU33 manual content summary:

  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 1
    Multimedia Projector MODEL PLC-SU33 Owner's Manual
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 2
    operate improperly, read this manual again, check operations and cable connections and try the solutions in the "TROUBLESHOOTING" section at the end of this booklet. If the problem still persists, contact the sales dealer where you purchased the projector or the service center. SAFETY PRECAUTIONS
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 3
    service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the projector. c. If the projector has been exposed to rain or water. d. If the projector does not operate normally by following the operating instructions
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 4
    the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Numbers Trade Name Responsible party Address Telephone No. : PLC-SU33 : Sanyo : SANYO FISHER COMPANY : 21605 Plummer Street
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 5
    SETTING-UP PROJECTOR 8 MANUAL PC ADJUSTMENT 25 CONNECTING AC POWER CORD 8 PICTURE IMAGE ADJUSTMENTS 27 POSITIONING PROJECTOR 9 IMAGE LEVEL SELECT 27 ADJUSTABLE FEET 9 IMAGE LEVEL ADJUSTMENT 28 MOVING PROJECTOR 10 PICTURE SCREEN ADJUSTMENT 29 CONNECTING PROJECTOR 11 VIDEO INPUT
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 6
    liquid crystal display (LCD) technology. N Compact Design This projector is extremely compact in space. N Compatibility This projector widely accepts various video and computer input signals manual adjustment of frequency and other settings. N One-Touch Auto PC Adjustment Incoming computer video
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 7
    BACK TOP CONTROLS AND INDICATORS INFRARED REMOTE RECEIVER POWER CORD CONNECTOR BOTTOM LAMP COVER ADJUSTABLE FEET AND FEET LOCK LATCHES SPEAKER TERMINALS AND CONNECTORS AIR FILTER AIR INTAKE VENTS (Back and Bottom) This projector is equipped with Cooling Fans for protection from overheating. Pay
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 8
    into any other type of power system. Consult your authorized dealer or service station if you are not sure of the type of power supply being in use. Connect a projector with a peripheral equipment before turning a projector on. (Refer to pages 11 ~ 13 for connection.) CAUTION For safety, unplug
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 9
    on a flat projection surface. G The projector can be focused from 3.0'(0.9m) ~ 22 the front of the projector and pull FEET LOCK LATCHES on the both sides of the projector. 2 Release FEET LOCK retract ADJUSTABLE FEET, lift the front of the projector and pull and undo FEET LOCK LATCHES. Keystone distortion
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 10
    When carrying a projector, use a suitable carrying case. G Do not transport a projector by using a courier or transport service in an unsuitable transport case. This may cause damage to a projector. To transport a projector through a courier or transport service, consult your dealer for best way. 10
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 11
    CONNECTING PROJECTOR TERMINALS OF PROJECTOR This projector has input and output terminals on its back for connecting computers and video equipment. Refer to figures on pages 11 to 13 and connect properly. S-VIDEO INPUT JACK Connect the S-VIDEO output from video equipment to this jack. (Refer to P13
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 12
    Pb / Cb - Pr / Cr S - VIDEO AUDIO IN R - AUDIO OUT - L COMPUTER RESET Use one of these Control Cables corresponding with the terminal of your computer. CONTROL PORT MCI / WI MONITOR OUT NOTE : When connecting the cable, the power cords of both the projector and the external equipment should
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 13
    Cables used for connection (✽ = Cable is not supplied with this projector.) • Video Cable (RCA x 1 or RCA x 3) ✽ • S-VIDEO Cable ✽ • Audio Cable (RCA x 2) ✽ Video Source (example) Video Cassette Recorder Video Disc Player Component video output equipment. (such as DVD player or high-definition TV
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 14
    used as a PC mouse in Wireless Mouse Operation. (P39) KEYSTONE NO SHOW FREEZE AUTO PC ADJ. IMAGE P-TIMER POWER ON-OFF BUTTON Used to turn projector on or off. (P19) INPUT BUTTON Used to select input source. (P22, 30) POINT BUTTON Used to move a pointer on ON-SCREEN MENU, adjust each
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 15
    DIGITAL ZOOM +/- mode and resize image. (P29) Operating Range Point Remote Control Unit toward projector (Receiver Window) whenever pressing any button. Maximum operating range for Remote Control Unit is about of used batteries according to battery manufacturer's instructions and local rules. 15
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 16
    CONTROL BUTTONS (TOP CONTROLS) and INDICATORS on its top. WARNING TEMP. INDICATOR Flashes red when internal projector temperature is too high. (P40) LAMP REPLACE INDICATOR Turns yellow when the life of the projection lamp draws to an end. (P37) MENU BUTTON Used to open or close MENU operation. (P17
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 17
    BEFORE OPERATION OPERATING ON-SCREEN MENU HOW TO OPERATE ON-SCREEN MENU You can control and adjust this projector through ON-SCREEN MENU. Refer to the following pages to operate each adjustment on ON-SCREEN MENU. 1 DISPLAY MENU Press MENU button to display ON-
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 18
    BAR Press MENU BUTTON while connecting to PC input source. GUIDE WINDOW Shows selected item of ONSCREEN MENU. PC SYSTEM MENU Used to change settings of projector or reset Lamp Replace Counter. (Refer to P35, 36) INPUT MENU Used to select input source either Computer or Video. (Refer to P22) PC
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 19
    Control Unit to ON. LAMP Indicator dims, and Cooling Fans start to operate. Preparation Display appears on a screen and the count-down starts. The signal from PC or Video source appears after 30 seconds. 30 Preparation Display disappears after 30 seconds. TURNING OFF PROJECTOR 1 Press POWER ON
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 20
    BASIC OPERATION ADJUSTING SCREEN ZOOM ADJUSTMENT 1 Press ZOOM button on Top Control or ZOOM L/M button on Remote Control Unit. The message "Zoom" is displayed. 2 Press ZOOM L button or POINT UP button to make image larger, and press ZOOM M button or POINT DOWN button to make image smaller. Zoom
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 21
    BASIC OPERATION NO SHOW FUNCTION Press NO SHOW button on Remote Control Unit to black out the image. To restore to normal, press NO SHOW button again or press any other button. No show Message disappears after 4 seconds. P-TIMER FUNCTION Press P-TIMER button on Remote Control Unit. The timer
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 22
    to DVI terminal, select Analog. Computer INPUT button Computer Video INPUT Menu icon Move a pointer (red arrow) to projector is set correctly. (Refer to TROUBLESHOOTING on page 41.) PC SYSTEM MENU SYSTEM Menu icon Displays system being selected. SELECT COMPUTER SYSTEM MANUALLY This projector
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 23
    COMPUTER INPUT COMPATIBLE COMPUTER SPECIFICATIONS Basically this projector can accept the signal from all 1024 x 768 XGA 6 1024 x 768 XGA 7 1024 x 768 XGA 8 1024 x 768 XGA 9 1024 x 768 XGA 10 1024 x 768 XGA 11 1024 x 768 XGA 12 1024 x 768 XGA 13 1024 x 768 XGA 14 1024 x 768 XGA
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 24
    . Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once parameters are memorized, the setting can be done just by Adjustment function. When the image is not provided properly through this function, manual adjustments are required. (Refer to page 25, 26.) G Auto PC
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 25
    reproduce a proper image and the image may be recognized as a flickering picture, a non-synchronized picture, a non-centered picture or a skewed picture. This projector has a Manual PC Adjustment to enable you to precisely adjust several parameters to match with those special signal formats. This
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 26
    SELECT button at Display area icon and Display area dialog box appears. Display area Display area V Adjustment of vertical area displayed with this projector. Press POINT LEFT/RIGHT button(s) to decrease/increase value and then press SELECT button. Full screen Press POINT LEFT/RIGHT button(s) to
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 27
    IMAGE button on Top Control or on Remote Control Unit. Standard Normal picture level preset on this projector. Real Picture level with improved halftone for graphics. IMAGE 1~4 User preset picture adjustment in IMAGE ADJUST Menu (P28). IMAGE button Standard Real Image 1 Image 2 Image 3 Image
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 28
    0 to 63.) Gamma Press either POINT LEFT button or POINT RIGHT button to obtain better balance of contrast. (From 0 to 15.) 3 Store To store manually preset image, move a red frame pointer to Store icon and press SELECT button. Image Level Menu will appear. Move a red frame pointer to the Image
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 29
    in its original size. When the original image size is larger than screen size (800 x 600), this projector enters "Digital zoom +" mode automatically. Wide Provides image to fit wide video aspect ratio (16 : 9) by expanding image width uniformly. This function can be used for providing a squeezed
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 30
    you want to select and then press SELECT button. Auto Video Projector automatically detects incoming Video signal, and adjusts itself to optimize its performance. • When both VIDEO jack and S-VIDEO jack are connected, S-VIDEO jack has priority over VIDEO jack. • When both Y-Pb/Cb-Pr/Cr jacks and
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 31
    that you want to select and then press SELECT button. VIDEO JACK OR S-VIDEO JACK Auto Projector automatically detects incoming Video system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select system manually. PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N If
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 32
    IMAGE button on Top Control or on Remote Control Unit. Standard Normal picture level preset on this projector. Cinema Picture level adjusted for the picture with fine tone. IMAGE 1~4 User preset picture adjustment in IMAGE ADJUST Menu (P33, 34). IMAGE button Standard Cinema Image 1 Image 2 Image
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 33
    VIDEO INPUT IMAGE LEVEL ADJUSTMENT 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/ obtain better balance of contrast. (From 0 to 15.) NOTE : Tint cannot be adjusted when the video system is PAL, SECAM, PAL-M or PAL-N. Press SELECT button at this icon to store the value. 33
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 34
    be set and then press SELECT button. PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display want to select and then press SELECT button. Normal Provides image at a normal video aspect ratio of 4 : 3. Wide Provides image at a wide screen ratio of
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 35
    UP/DOWN/LEFT/RIGHT button(s). Refer to KEYSTONE ADJUSTMENT on page 20. Blue back When this function is "On," this projector will produce a blue image instead of the video noise on the screen when any input source is unplugged or turned off. When pressing SELECT button at Language, Language Menu
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 36
    (jam) when operating several projectors or video equipment together. When operating projector in "Code 2," both projector and Remote Control Unit must code (Code 1). Lamp counter reset This function is used to reset Lamp Replace Counter. When replacing Projection Lamp, reset Lamp Replace Counter by
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 37
    ASSEMBLY SCREW HANDLE ORDER REPLACEMENT LAMP Replacement Lamp can be ordered through your dealer. When ordering a Projection Lamp, give the following information to the dealer. G Model No. of your projector : G Replacement Lamp Type No. : PLC-SU33 POA-LMP35 (Service Parts No. 610 293 2751
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 38
    a new one IMMEDIATELY after the projector has cooled down. ( Follow carefully the instructions in the LAMP REPLACEMENT section of this manual. ) Continuous use of the lamp with the LAMP REPLACE INDICATOR lighted may increase the risk of lamp explosion. G A Lamp may explode as a result of vibration
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 39
    When ONSCREEN MENU or any message / dialog box is displayed on the screen instead of PC mouse pointer, the POINT and CLICK buttons control the projector, rather than the computer. INSTALLATION To use the Wireless Remote Control Unit as Wireless Mouse, a mouse driver must be already installed on your
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 40
    fully inserted. CAUTION Do not operate the projector with Air Filter removed. Dust may accumulate on LCD Panel and Projection Mirror degrading picture quality above symptoms are noticed, contact your authorized dealer or service station for proper cleaning. CLEANING PROJECTION LENS Follow these
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 41
    APPENDIX TROUBLESHOOTING Before calling your dealer or service center for assistance, check the items below once again. 1. Make sure you have connected a projector to your computer or video equipment as described in the section "CONNECTING PROJECTOR" on pages 11 ~ 13. 2. Check cable connection.
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 42
    . WARNING : High voltages are used to operate this projector. Do not attempt to open the cabinet. If the problem still persists after following all operating instructions, contact the sales dealer where you purchased the projector or the service center. Give the model number and explain about the
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 43
    TECHNICAL SPECIFICATIONS Projector Type Dimensions (W x H x D) Net Weight LCD Panel System Panel Resolution Number of Pixels Color System High Definition TV Signal Scanning Frequency Projection Image size (Diagonal) Horizontal Resolution Projection Lens Throw Distance Projection Lamp Video Input
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 44
    .sync.) 13 Horiz. sync. 6 Ground (Red) 14 Vert. sync. 7 Ground (Green) 15 DDC Clock 8 Ground (Blue) DVI-I TERMINAL (DIGITAL/ANALOG) Pin Configuration C1 C2 12345678 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 C3 C4 C5 C1 Analog Red Input C2 Analog Green Input
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 45
    CONTROL PORT CONNECTOR Terminal : Mini DIN 8-PIN Pin Configuration 876 5 43 21 PS/2 Serial ADB 1 ----- R X D ----- 2 CLK ----- ADB 3 DATA ----- ----- 4 GND GND GND 5 ----- RTS / CTS ----- 6 ----- T X D ----- 7 GND GND ----- 8 ----- GND GND USB CONNECTOR (Series B) Pin
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 46
    46
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 47
    47
  • Sanyo SU33 | Instruction Manual, PLC-SU33 - Page 48
    Printed in Japan Part No. 610 300 4808 (1AA6P1P3414-- MJ8A) SANYO Electric Co., Ltd.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
Multimedia Projector
MODEL
PLC-SU33
Owner’s Manual