Sanyo SU33 Instruction Manual, PLC-SU33 - Page 30

VIDEO INPUT SELECTING INPUT SOURCE DIRECT OPERATION Choose Video by pressing INPUT button on Top Control or on Remote Control Unit. If projector cannot reproduce proper video source, select correct input source through MENU OPERATION (see below). INPUT button Video Computer MENU OPERATION 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to INPUT Menu icon. 2 Press POINT DOWN button to move a red arrow pointer to Video and then press SELECT button. Source Select Menu will appear. 3 Move a pointer to the source that you want to select and then press SELECT button. Auto Video Projector automatically detects incoming Video signal, and adjusts itself to optimize its performance. • When both VIDEO jack and S-VIDEO jack are connected, S-VIDEO jack has priority over VIDEO jack. • When both Y-Pb/Cb-Pr/Cr jacks and S-VIDEO jack are connected, Y-Pb/Cb-Pr/Cr jacks have priority over SVIDEO jack. When video input signal is connected to VIDEO jack, select Video. S-Video When video input signal is connected to S-VIDEO jack, select S-Video. Y,Pb/Cb,Pr/Cr When video input signal is connected to Y-Pb/CbPr/Cr jacks, select Y, Pb/Cb, Pr/Cr. INPUT MENU VIDEO Move a pointer to Video and press SELECT button. Source Select Menu (VIDEO) Move a pointer to the source and press SELECT button. 30