Sanyo VCC-5884E Brochure - Page 2

VCC-5884 E Features • 1/3-inch CCD image sensor with approx. 410,000 picture elements. • Super high horizontal resolution of 540 TV lines (typical) for maximum detail and a noticeably sharper, clearer picture. • High sensitivity for monitoring at a minimum required illumination of 1.0 lx with F1.2 lens (AGC on). • Built-in DSP (digital signal processing) circuitry delivers superior color reproduction and reduced noise. • Backlight compensation (center-zone photometry system) Luminance measured at center and automatic lens aperture adjustment enable a clear image even when backlit. • Automatic gain control A sliding ON/OFF switch allows you to turn the automatic gain control on or off as required. • A uniquely compact design Its extraordinarily compact size [63 (W) x 68 (H) x 51 (D) mm] makes the camera inconspicious. And it is possible to hide it even more effectively by enclosing it in a 5-inch dome. Other Features • Auto-tracing white balance. • Electronic iris for indoor use with manual or fixed iris lens. • Internal/Line lock synchronizing system. • Runs on 24V AC or 12 to 15V DC power sources. 540 TVL (typical) Cameras for Greater Peace of Mind VCC-ZM600 VCC-ZM600N IP Camera 1/4" Color CCD DSP High-resolution Day/Night AF Zoom Camera VCC-XZ600 VCC-XZ600N IP Camera 1/4" Color CCD DSP High-resolution Weatherproof Day/Night AF Zoom Camera VCC-9684VA 1/4" Color CCD Indoor Mini Dome Camera Specifications Model No. Scanning system Image sensor Effective picture elements Horizontal resolution Minimum illumination Video output level Video S/N ratio Backlight compensation White balance Gain control Light control Lens mount Flange back Auto iris lens Auto iris output Lens iris level Electronic iris Electronic iris range Synchronizing system V phase adjustment Sockets Video signal Auto iris lens Power supply Operating Operating conditions Storage Power requirement Power consumption (approx.) Camera mount Dimensions (approx.) Weight (approx.) VCC-5884 E NTSC Standard 525 Lines, 30 frames/sec. 1/3" (approx. 4.8 x 3.6 mm) interline transfer method CCD 768 (H) x 494 (V) 540 TV lines (typical) 1.0 lx (AGC on) at F1.2 1.0 V (p-p) / 75 ohms, composite More than 50 dB (AGC off) ON / OFF - Slide SW (side) ON = Center-zone photometry system - Slide SW (side) (activated when auto iris lens used) TTL auto tracing white balance AGC on/off Optical auto iris lens / Electronic iris (indoor use) CS mount (top / bottom selectable) 12.5 mm ±0.5 mm adjustment DC type DC: Drive coil (+, -), Brake (damp) coil (+, -) LEVEL: L to H - VR (side) ON (EI) / OFF (AI) - Slide SW (side) 1.0 to 50,000 lx (with F1.2 lens) Internal sync / Line lock - Slide SW (side) LINE PHASE - VR (rear) VIDEO OUT - BNC (rear) LENS - 4-pin (side) 24V AC, GND - Pushlock terminal x 3 (rear) 12V DC, GND - Pushlock terminal x 2 (rear) Temperature: -10˚C to 50˚C [14˚F to 122˚F], Humidity: within 90% RH Temperature: -20˚C to 70˚C [-4˚F to 158˚F], Humidity: within 70% RH 24V AC, 60 Hz / 12 to 15V DC 3.6 W 1/4" - 20 UNC (top / bottom selectable) 63 (W) x 68 (H) x 51 (D) mm [2.48 (W) x 2.68 (H) x 2.01 (D) in.] (excluding protrusions) 160 g [5.64 oz] (without lens) NOTE: Specifications subject to change without notice. Dimensions 1/4" - 20 UNC threaded hole 63 (2.48) 1 (0.04) 52 (2.05) 51 (2.01) [Unit: mm (inch)] 68 (2.68) VCC-4794 E 1/3" Color CCD DSP Day/Night Camera VCC-6584 E 1/3" Color CCD DSP High-resolution Camera Flange-back adjustment screw 1/4" - 20 UNC threaded hole AC 24V ~ ~GND DC 12V + - VIDEO OUT Flange-back lock screw Rear panel Caution: Please consult the instruction manual to ensure safe and proper operation of the product. EC00J0303 051 Distributed by: DI Company of SANYO Electric Co., Ltd. obtained Quality Management System ISO 9001 and Environmental Management System ISO 14001 certifications. SANYO Electric Co., Ltd. DI Company http://www.sanyosecurity.com ©2008 SANYO Printed in Japan 2008.1 MA SMS154