Sanyo VCC-9500IN Brochure - Page 4

Features Max. 576x Zoom combined with 36x Optical and 16x Digital Zooms (VCC-9800/9700) The 36x optical zoom and 16x digital zoom can be combined for a close-up at a magnification power of 576x. This allows even distant subjects to be checked in detail, allowing one camera to monitor a wider area. 36x Optical zoom Upward Surveillance Enabled PTZ Operation In addition to endless 360°/sec panning, the camera's lens section enables 185°/sec tilting in the vertical plane for an area of surveillance expanded by 5° (indoor applications only) compared to previous models. Horizontal level Panning range 360˚endless Tilting range -5˚ to 185˚ (With digital auto flip ON) No dead areas with new speed dome cameras Dead area when at 0° tilt Up to 256 Preset Positions The user can set up to 256 preset positions with VCC-9800/ 9700 cameras and up to 128 preset positions with VCC9600/9500 cameras. Preset positions can be set to any angle-from directly below the camera to 5° higher than the horizontal position-to allow capture of any image in the area under surveillance by facing any direction in the adjustable range of the lens. When manually operated, the lens can be moved at the speed of 0.1 to 120°/sec for accurate tracking of moving objects. Camera Display floor Entrance Reception Display floor Store display floor example All-around Privacy Masking When there is a house, or even a window, within the camera frame, it is possible to mask the area so that it will not appear on the monitor screen, thus protecting other people's privacy. Up to 24 rectangular masks of arbitrary size (rectangular) can be set. SSP (RS-485) Compatible By using SSP (SANYO Security Serial Protocol), devices can be controlled with just one controller via a daisy chain connection of up to 254 cameras and 100 DVRs. The maximum cable length (total length of the daisy chain path) is 1200 m (4000 feet) (approx.). Main Monitor Dome Camera Main Monitor Dome Camera Image from conventional camera* at 0° tilt *Competitor's Upward tilt to 5° past zero for an expanded area of surveillance with VCC-9800/9700/ 9600/9500 cameras 3 Types of Auto Mode Settings Sequence: Automatic viewing of up to 256 presets (36x models) or 128 presets (30x models), with selectable switching order and pause times for up to 4 different sequences. Auto pan: Up to 4 different settings for automatic panning between two points at selectable speeds. Tour: Up to 4 different settings capable of storing up to 1,000 commands of manual pan/tilt/zoom operation in memory and recreating the same movement pattern. Auto return: Enables automatic return to the mode set in "auto return" when manual operation is not performed within a specified amount of time. Digital Video Recorder Spot Monitor Digital Video Recorder Spot Monitor SSP System Controller SSP System Controller RS-485 Coaxial Coaxial Control or RS-485 Communication protocol: Coaxial control: SSP / H-SSP / PELCO-C RS-485: SSP / H-SSP / PELCO-D Adjustment via VAC-70 Control Unit (Sold separately) Connection of the VAC-70 control unit allows adjustment of pan/tilt/zoom and setup directly from an on-screen menu. Video coaxial cable VAC-70 Monitor