Sanyo VCC-HD2500 VCC-HD2500 A & E Specifications - Page 4
The camera shall support Back Light Compensation BLC circuitry - hd 1080p
UPC - 086483075018
View all Sanyo VCC-HD2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
SANYO VCC-HD2500 1080p 4 MEGAPIXEL DAY-NIGHT CS BOX CAMERA WITH AUDIO 2. Provide selection of languages from English, French, German, Japanese and Spanish. 3. Progressive Scan CMOS technology for image clarity. 4. Four (4) Megapixels maximum resolution 5. Five levels of operator privileges shall be available. a. Admin level shall have full access to all functions. b. Operator1 level shall have access to all functions except Network settings. c. Operator2 level shall have access to all functions except configuration settings. d. Download level shall be restricted to downloading recorded images only. e. Guest will be restricted to monitoring live video only. 6. Provide Day & Night function allowing automatic changeover from color mode to B&W mode as well as removal of an IR cut filter during low light operation. 7. Automatic mechanical back-focus via manual and one-touch controls locally to the camera or remotely via the web. Camera shall have advanced programmable motion detection. Selectable modes include a. Motion Detection b. Motion Masking c. Off. 8. Human Face Detection shall be available in both Detection and Masking modes selectable by area. a. Up to 32 faces shall be detectable at once. b. The camera shall tune BLC via detected faces c. The camera shall be able to transmit an alarm based on detecting one or more faces and motion detection at the same time in the scene. 9. The camera shall support digital trip wire functionality at no additional cost a. Up to 8 digital tripwires shall be configurable with independent controls for length, angle, vector (left to right, right to left or both) and tripwire sensitivity. b. Up to 4 areas shall be configurable. 10. The camera shall support Back Light Compensation (BLC) circuitry 11. Provide HD image recording to an on-board SD memory card slot (card optional) 12. Provide flexible on-board recording capability allowing recording by Alarm (motion or input 1/2) including programmable pre-alarm recording, or Back-up in the event of loss of network. 13. Provide internal verification whether or not any electronic alteration was made to original images. Project Name/Project Number 28 23 29 - 12 Video Surveillance Remote Devices and Sensors