Sanyo VCC-HD4000 Instruction Manual, VCC-HD4000 QSG - Page 2

Setting up the camera from the Menu screen displayed on PC GB This camera is shipped with the standard setting values and you can start using the camera without performing any settings. If necessary, make appropriate settings or adjustment according to your usage. For details, refer to the electronic manual contained in the supplied CD-ROM. ● If you have trouble adjusting the camera, consult your dealer or an Authorized Sanyo Service Center. CAMERA SETTINGS screen: Adjusting Surveillance Image 1 Display the Menu screen. 2 Select monitor display mode and click the [SET] button. 3 Display a SETTINGS screen for each menu. 4 Return to the live screen. (Control panel) (Menu screen) 3 14 2 * The control panel shown above represents the one for admin user. Menu button list Menu button Description NETWORK SETTINGS screen: Configure the network information on the camera such as IP address and subnet mask. CLOCK SETTINGS screen: Configure the time information required for network connections and live video recording, which includes the current date and time, summer time (daylight saving time), and automatic clock adjustment. CODEC/STREAMING SETTINGS screen: Configure the image quality and transmission method to be used for transmitting the still images or video that were recorded through the camera. CAMERA SETTINGS screen: Configure the monitoring conditions (e.g. lens and focus) and the operating conditions (e.g. day/night and privacy mask) in line with the installation environment of the camera. ALARM SETTINGS screen: Configure alarm input/output and motion sensor. RECORD SETTINGS screen: Configure the following conditions for recording images through the camera: • Conditions for normal recording, alarm recording, and timer setting • Setting for the REC button (for Emergency recording) • Backup recording setting in the event of communication error due to network failure during recording with the special software. • Initialization of SD card or external hard disk drive and settings for recording area • Overwriting and automatic deletion of record data E-MAIL SETTINGS screen: Configure automatic e-mail transmission. Image data can be attached. • Sending e-mail when an alarm is detected. • Sending e-mail at specified intervals IMAGE TRANSFER SETTINGS screen: Configure to transfer to PC the live video recorded through the camera. • HTTP: You can confirm the settings you made by using the optionally available "VA-SW3050 Server/Client" recorder/player software. • FTP: Transfers the image to the FTP server. SECURITY SETTINGS screen: You can either permit or reject access to the cameras. TV OUT SETTING screen: Select the display position on the monitor screen for the information such as camera title. • When you use the SD OUT terminal, you can clip any selected portion of the video for intensive monitoring. • When you use the HDMI terminal, you can select the screen size. SCHEDULE SETTINGS screen: Configure the schedules for sending e-mail, transferring image and moving to the preset position. You can also specify the dates to be regarded as holidays. OPTION SETTINGS screen: • UPnP function • Power indicator/Error indicator setting (front panel) • Tamper detection • Firmware version upgrade • Initialization of settings • Backup and restoration of each menu configured through the network • Restarting the system, checking system information Provides the descriptions of individual functions. VIEW You can configure two types of "CAMERA SETTINGS" for different monitoring conditions. ■ CAM1 (e.g. for day time) ■ CAM2 (e.g. for night time) IRIS Set the lens iris. ■ AUTO ■ MANUAL WHITE BALANCE ■ ATW (Auto Tracing White balance) • You can configure the masking when an extremely bright light source or a dark spot exists in the video image. ■ AWC (Auto White balance Control) • Push to lock the button to make adjustment to a white subject so that it appears natural white. White paper or wall ■ 3200 ( for indoor use) ■ 5600 ( for outdoor use) ■ FLUORESCENT ( for fluorescent light) ■ MWB (Manual White Balance) BLC Compensates the backlight. ■ MULTI (Multi-spot evaluative metering) AGC You can monitor subjects in the dark places. ■ ON • Automatically adjusts according to the ambient brightness. ■ OFF • You may make adjust manually. If [AGC] cannot be set to "OFF", [DAY/ NIGHT] is set to "AUTO" or [SENSE UP] is set for [IRIS (AUTO)]. DAY/NIGHT Switches between color and black-and-white modes. ■ AUTO (Automatically switches between color and black-and-white modes according to the ambient brightness) • If [DAY/NIGHT] is set to "AUTO", [AGC] is set to "ON". ■ COLOR (Fixes the video mode to color.) ■ B/W (Fixes the video mode to black-and-white.) LOW MID HIGH B/W Color Switchover point QUALITY Adjusts contour, color saturation, contrast, and so on. ■ CENTER (Center-weighted average metering) FOCUS Sets the focusing mode. ■ AUTO ■ MANUAL ZOOM Sets the optical zooming speed and electronic zooming magnification. ■ MASKING (Light source masking) ■ FACE (Face detection backlight compensation) PRIVACY MASK Sets masks on certain part of the image for privacy protection. • You can set up to 5 masks. SHUTTER Sets the electronic shutter speed. ■ SHORT (Fast shutter speed) ■ LONG (Long exposure shutter speed) ■ OFF • If [SHUTTER] cannot be set to "SHORT" or "LONG", [SENSE UP] is set for [IRIS (AUTO)]. 1AC6P1P3314-L5CL2/XE, US (0808KP-HS)