Sanyo VCC-HD4000P Instruction Manual, VCC-HD4000P Installation - Page 11
About the, Internet connection, Port 2: H.264 UDP Unicast - instruction manual
View all Sanyo VCC-HD4000P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
About the "A Internet connection" Port forwarding for the video port (HTTP/UDP) must be enabled on the broadband router. For details on how to set port forwarding, please refer to your router's Instruction manual. b Port 1: JPEG/H.264 HTTP Port number (default): 80 (TCP) IP address (default): 192.168.0.2 Port number (default): 80 (TCP) • Set to same value as on LAN To LAN port To WAN port b Port 2: H.264 UDP Unicast Port number (default): 3939 (UDP) IP address (default): 192.168.0.2 Router Port number (default): 3939 (UDP) • Set to same value as on LAN To LAN port To WAN port Router To view H.264 video over the Internet, set port forwarding for UDP to enable communication using UDP protocol. However, it may not be possible depending on your network environment. Consult your network administrator. MEMO: If you install multiple cameras, for second and later cameras, specify different numbers for ports 1 and 2 than those for the first camera via the network. • Port 1: [NETWORK] → "PORT NUMBER" • Port 2: [CODEC/STREAMING] → "UDP (Unicast) PORT" 10