Sanyo VCC-HD5400 Print Specs - Page 6

SANYO VCC-HD5400 1080p 2 MEGAPIXEL DAY-NIGHT PTZ CAMERA WITH AUDIO a. Up to 32 faces shall be detectable at once. b. The camera shall tune its focus, BLC via detected faces c. The camera shall be able to transmit an alarm based on detecting one or more faces and motion detection at the same time in the scene. 16. The camera shall support digital trip wire functionality at no additional cost a. Up to 8 digital tripwires shall be configurable with independent controls for length, angle, vector (left to right, right to left or both) and tripwire sensitivity. b. Up to 4 areas shall be configurable. 17. The camera shall support Back Light Compensation (BLC) circuitry 18. Provide HD image recording to an on-board SD memory card slot (card optional) 19. Provide flexible on-board recording capability allowing recording by Alarm (motion or input 1/2/3/4) including programmable pre-alarm recording, or Back-up in the event of loss of network. 20. Provide internal verification whether or not any electronic alteration was made to original images. 21. When image data is output on a conventional SD output The camera shall eliminate "smearing" associated caused by vertical noise associated with bright spots (such as headlights). C. Video Requirements and Adjustments: 1. Minimum Adjustments and Requirements a. Imager: Progressive Scan 1/2.5" inch CMOS. b. Pixels: 1920(H) x 1080(V) effective picture elements. c. Image Size: H.264 - 16:9 HD: 1920 x 1080, 30 ips. HD: 1280 x 720 30 ips; 640 x 360 30 ips; 320 x 180 30 ips. H.264 4:3: 1600x1200 30 ips; 1280 x 960 30 ips; 1024 x 768 30 ips; 640x480 30 ips; 320 x 240p 30 ips. d. Image Size: MJPEG 16:9 HD: 1920 x 1080; HD 1280 x 720; 1024 x 576; 640 x 360. JPEG 4:3 1600 x 1200, 1280 x 960; 1024 x 768; 800 x 600; 640 x 480; 320 x 240. e. Iris Control: Selectable Auto/Manual. Project Name/Project Number 28 23 29 - 18 Video Surveillance Remote Devices and Sensors