Sanyo VCC-XZ200H Print Specs - Page 2

PAN-FOCUS DAY/NIGHT WEATHERPROOF ZOOM CAMERA Camera Specifications MODEL VCC-XZ200 Scanning System NTSC Standard 525 lines, 60 fields/sec. Image Sensor 1/4" Interline transfer method CCD (3.6 x 2.7 mm) Number of Pixels Total: 811 (H) x 508 (V), Effective 768 (H) x 494 (V) Horizontal Resolution More than 520 TV lines Min.Illumination 50IRE 1.2 lx (F1.9, Gain High, color mode) / 0.06 lx (F1.9, Gain High, B/W mode) (approx.) 20IRE 0.48 lx (F1.9, Gain High, color mode) / 0.024 lx (F1.9, Gain High, B/W mode) Video Output 1.0 V (p-p) (75 Ω, composite) Video S/N Ratio More than 50 dB (AGC OFF) Backlight Compensation ON (Multi-spot photometry [High/Normal], Center-zone photometry) /OFF White Balance ATW, AWC, Manual (MWB), Outdoor (3200), Indoor (5600), Fluorescent (FLUO) Gain Control High / Normal / Off Gamma 0.45 / 1 Lens Built-in motorized zoom pan-focus auto iris lens, f=2.8 to 7/3 mm (x2.6), F1.9 to 3.0 Electronic Shutter 1/60, 1/100,1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 sec. Motion Detector On / Off: Motion zoom function Privacy Masking On / Off: Max. 4 masked locations Alarm Input 1 (NO / NC), with alarm zoom function Character Display On / Off, Camera ID Max. 16 characters, adjusting position Synchronizing System Internal synchronization / Line lock Day/Night Mode Auto (High/Low) / Color / B/W: External control Aperture Compensation High Plus / High / Normal / Off Environmental Operating Temperature: -10°C to +50°C (14°F to +122°F), Humidity: within 90%RH Conditions Storage Temperature: -20°C to +70°C (-4°F to +158°F), Humidity: within 70%RH Power Supply 24 V AC ±10%, 60 Hz or 12 V to 15 V DC Power Consumption (approx.) 3.5 W (without options), 6.0 W (with options), 13.0 W (with heater) Dimensions (approx.) 141(W) x 181.9(H) x 379.6(D) m [5.55(W) x 71.61(H)x 149.45 (D) in.] Weight (approx.) 1.76 kg [62.1 oz.] (with sunshade), 1.56 kg [55.0 oz.] (without sunshade) Waterproof Standard IP66 Regulatory UL, FCC Class B Camera Set-up Unit VAC-70 (sold separately) MODEL VAC-70 Video output terminal BNC x 1 Camera input terminal BNC x 1 Environmental conditions Temperature: -10°C to 50°C [14°F to 122°F] Humidity: 10 to 80% Power requirement 3V DC, 2 AA / LR6 / 1.5 V batteries Dimensions 80(W) x 40(H) x 140(D) mm [3.2(W) x 1.6(H) x 5.5(D) in.] Weight (approx.) 230 g [8.1 oz.] (without batteries) Model Configurations VCC-XZ200 VCC-XZ200H VCC-XZ200S VCC-XZ200SH VCC-XZ200N VCC-XZ200NH RS-485/UTP Coax Control X X Network Control X X Heater X X X Optional Boards Network Board VA-20LAN SSP+Twisted pair board VA-20ST Heater board VA-50H Bandwidth limit: No limit / 128 Kbps to 4 Mbps; Alarm buffer: 8 MB max., adjustable; Interface: 10BASE-T / 100BASE-TX RJ45 terminals, links shown by OSD Communication protocol Coaxial control: SSP/H-SSP/PELCO-C RS-485: SSP/PELXCO-D Video out: Coaxial cable / Category 5 LAN cable (NVT built-in UTP video) Operating environment (with power source connected) Temperature: -30°C to +50°C [-22°F to 122°F] (24 V AC only) Humidity: less than 90% RH (no condensation) Dimensions With Sunshade 123(4.84) 74.6(2.93) 379.6(14.93) 224.3(8.83) Without Sunshade 74.6(2.93) 360.6(14.19) 191.4(7.53) 21.2 (0.83) 86.6(3.40) 28.9(1.13) 150(5.90) 172(6.77) 172(6.77) 181.9(7.16) 86.6(3.40) 28.9(1.13) 150(5.90) 172(6.77) 86.6(3.40) 172(6.77) 28.8(1.13) 110(4.33) 141(5.55) 28.8(1.13) 110(4.33) 141(5.55) [Unit: mm (inch)] Specifications and product design are subject to change without notice. ©2006 SANYO Security Products SANYO Security Products 21605 Plummer Street Chatsworth, CA 91311 Phone: (888) 893-7403 Fax: (888) 818-2597 Technical Support: (888) 66-SANYO www.sanyocctv.com