Sanyo VDC-D1584VA Print Specs - Page 2
Lens adjustments - camera
UPC - 086483065071
View all Sanyo VDC-D1584VA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
VANDAL RESISTANT DOME CAMERA SERIES Camera Specifications MODEL Scanning system Image sensor Picture elements Horizontal resolution Minimum 50 IRE illumination 20 IRE VDC-W1594VA 480 TV lines 1.0 lx (at F 1.4, color mode) 0.56 lx (at F 1.4, color mode) Video output level Video S/N ratio Backlight compensation White-balance AWB Gain control Gamma Electronic shutter Iris control Lens Angle of Horizontal view Vertical Synchronizing system Sockets Video signal Power supply Operating Operating conditions Storage Power requirement Power consumption (approx.) 3.5 W Waterproof standard Dimensions (approx.) Weight (approx.) 845 g [13.8 oz.] Regulatory VDC-D1584VA VDC-C1574VA NTSC standard 525 lines, 60 fields/sec. 1/3" (approx. 4.8 mm x 3.6 mm) interline transfer method CCD Total: 811(H) x 508(V), Effective: 768(H) x 494(V) 1.0 (at F 1.4, color mode) 520 TV lines 1.0 lx (at F 1.4, color mode) 0.05 lx (at F 1.4 lens, B/W mode) T.B.D (at F 1.4, color mode) 0.56 lx (at F 1.4, color mode) 0.016 lx (at F 1.4 lens, B/W mode) 1.0 V (p-p) (75 Ω, composite) More than 50 dB (AGC OFF) ON / OFF --- Slide SW ATW / AWB / Manual ON / OFF 0.45 4-Mode: 1/60, 1/100, 1/1000, 1/2000 sec. --- Slide SW Optical auto iris lens Built in vari-focal lens f=2.6 to 6.0 mm 0 to 360° 0 to 120° Internal sync. VIDEO OUT --- BNC 24 V AC, GND, 12 V DC Temperature: -10°C to 55°C [+14F° to 131°F], Humidity: within 90% RH Temperature: -20°C to 70°C [- 4F° to 158°F], Humidity: within 70% RH 24 V AC ± 10%, 60 Hz or 12 V to 15 V DC 2.2 W IP66 140.2(ø) x 91.5(H) mm [5.6(ø) x 3.6(H) in.] 850 g [13.9 oz.] UL, FCC Class B 845 g [13.8 oz.] Dimensions Lens Adjustments VDC-W1594VA/VDC-D1584VA/VDC-C1574VA ø140.2(5.51) 88.0(3.46) 46.0(1.81) 46.2(1.81) 5.0 (0.19)8.0 (0.31) 30.0(1.18) 88.0(3.46) 82.5(3.24) Lens adjustments 1. Adjust the panning (360°) and tilt (120°) position. 2. Setting the zoom position by using Zoom Lever Screw. 3. Setting the focus by using Focus Lever Screw. 91.5(3.6) VIDEO (yellow) BNC JACK DC 12 V or AD 24 V RED BLACK 5mm TWIST SOLDERING [Unit: mm (inch)] Specifications and product design are subject to change without notice. ©2006 SANYO Security Products SANYO Security Products 21605 Plummer Street Chatsworth, CA 91311 Phone: (888) 893-7403 Fax: (888) 818-2597 Technical Support: (888) 66-SANYO www.sanyocctv.com