Sanyo VDC-HD3100 VDC-HD3100 A & E Specifications - Page 6
Storage Temperature: -4°F to 158°F -20°C to +70°C within 70
UPC - 086483075124
View all Sanyo VDC-HD3100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
SANYO VDC-HD3100 1080p 4 MEGAPIXEL COLOR VANDAL DOME CAMERA 12. The camera shall support both fixed IP addresses and dynamically assigned IP addresses provided by a Dynamic Host Control Protocol (DHCP) server. 13. The camera shall be able to interface with SANYO Video Pilot software. Video Pilot shall support full functionality when operating on Windows Vista or Windows XP Professional Edition with SP2/SP3. 14. Third party application integration of the camera is supported via two (2) Development Kits which provide the necessary information for interfacing. Contact SANYO for details. 15. Image quality selectable at Basic, Normal, Enhanced (default), Fine and Super Fine. 16. Resolutions may be set for Live modes. F. Electrical: 1. Camera input voltage/power requirements: 24V AC, 60Hz, 12-15V DC, IEEE 802.3af PoE 2. Power Consumption: 4.6w G. Mechanical: 1. Weight: 27.16 oz. (770g). 2. Dimensions: Φ 146 X 94mm (Φ 5.75" x 3.70") H. Environmental: 1. Operating Temperature: 14°F to 122°F (-10° to +50°C) within 90% relative humidity. 2. Storage Temperature: -4°F to 158°F (-20°C to +70°C) within 70% maximum relative humidity. PART 3 - EXECUTION 3.1 EXAMINATION A. Examine areas to receive devices and notify adverse conditions affecting installation or subsequent operation. B. Do not begin installation until unacceptable conditions are corrected. 3.2 PREPARATION A. Protect devices from damage during construction. 3.3 INSTALLATION A. Install devices in accordance with manufacturer's instruction at locations indicated on the floor drawings plans. B. Perform installation with qualified service personnel. C. Install devices in accordance with the National Electrical Code or applicable local codes. D. Ensure selected location is secure and offers protection from accidental damage. E. Location must provide reasonable temperature and humidity conditions, free from sources of electrical and electromagnetic interference. 3.4 FIELD QUALITY CONTROL A. Test snugness of mounting screws of all installed equipment. B. Test proper operation of all video system devices. Project Name/Project Number 28 23 29 - 15 Video Surveillance Remote Devices and Sensors