Sanyo VDC-HD3500 VDC-HD3500 A & E Specifications - Page 3

Megapixel 1080p Full High Definition Day/Night Network CMOS Camera - vcc -

Page 3 highlights

SANYO VCC-HD3500 1080p 4 MEGAPIXEL DAY-NIGHT VANDAL DOME CAMERA WITH AUDIO trained by the manufacturer in the installation and service of the equipment provided. 1.6 DELIVERY, STORAGE AND HANDLING A. Comply with requirements of Section [01 60 00] B. Deliver materials in manufacturer's original, unopened, undamaged containers; and unharmed original identification labels. C. Protect stored materials from environmental and temperature conditions following manufacturer's instructions. D. Handle and operate products and systems according to manufacturer's instructions. PART 2 - PRODUCTS 2.1 MANUFACTURERS A. Acceptable Manufacturer Sanyo Company Security Products Division 21605 Plummer Street Chatsworth, CA 91311 Phone: 888. 818. 2597 Fax: 818.717.2716 http://us.sanyo.com/security B. Substitutions: Under provisions of Division 1 1. All proposed substitutions must be approved by the Consultant, or Architect/Engineer professional. 2. Proposed substitutions must provide a line-by-line compliance documentation. 2.2 4 Megapixel 1080p Full High Definition Day/Night Network CMOS Camera with Audio A. General Characteristics: 1. Be designed to provide advanced image support resolutions up to 4 Megapixels of effective picture elements 2288(H) x 1712(V). 2. Provide dual Codec for simultaneous H.264 and JPEG transmission. 3. Be designed to provide 1080p H.264 compressed video at 30 frames per second. 4. Use a high quality 1/3" CMOS progressive scan image sensor 5. Vandal Dome Housing capable of being mounted indoor or outdoor(International Waterproof and Dustproof Standard:IP66) 6. Provide color pictures in light down to 1.0 lux at F 1.2 7. Provide B/W pictures in light down to 0.1 lux at F 1.2 8. Provide for Audio input and output directly to and from the camera 9. Be capable of accepting power from 12V DC, 24V AC or IEEE 802.3af Power-over-Ethernet (PoE) 10. Be capable of transmitting analog NTSC video for setup and installation purposes 11. Be capable of storing images on-camera via SDHC storage B. Camera shall be capable of the following adjustments and features: Project Name/Project Number 28 23 29 - 17 Video Surveillance Remote Devices and Sensors

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

SANYO VCC-HD3500 1080p 4 MEGAPIXEL DAY-NIGHT VANDAL DOME CAMERA WITH
AUDIO
Project Name/Project Number
28 23 29 - 17
Video Surveillance Remote Devices and Sensors
trained by the manufacturer in the installation and service of the
equipment provided.
1.6
DELIVERY, STORAGE AND HANDLING
A.
Comply with requirements of Section [01 60 00]
B.
Deliver materials in manufacturer’s original, unopened, undamaged
containers; and unharmed original identification labels.
C.
Protect stored materials from environmental and temperature conditions
following manufacturer’s instructions.
D.
Handle and operate products and systems according to manufacturer’s
instructions.
PART
2 - PRODUCTS
2.1
MANUFACTURERS
A.
Acceptable Manufacturer
Sanyo Company
Security Products Division
21605 Plummer Street
Chatsworth, CA 91311
Phone: 888. 818. 2597
Fax: 818.717.2716
B.
Substitutions: Under provisions of Division 1
1.
All proposed substitutions must be approved by the Consultant, or
Architect/Engineer professional.
2.
Proposed substitutions must provide a line-by-line compliance
documentation.
2.2
4 Megapixel 1080p Full High Definition Day/Night Network CMOS Camera with
Audio
A.
General Characteristics:
1.
Be designed to provide advanced image support resolutions up to 4
Megapixels of effective picture elements 2288(H) x 1712(V).
2.
Provide dual Codec for simultaneous H.264 and JPEG
transmission.
3.
Be designed to provide 1080p H.264 compressed video at 30
frames per second.
4.
Use a high quality 1/3” CMOS progressive scan image sensor
5.
Vandal Dome Housing capable of being mounted indoor or
outdoor(International Waterproof and Dustproof Standard:IP66)
6.
Provide color pictures in light down to 1.0 lux at F 1.2
7.
Provide B/W pictures in light down to 0.1 lux at F 1.2
8.
Provide for Audio input and output directly to and from the camera
9.
Be capable of accepting power from 12V DC, 24V AC or IEEE
802.3af Power-over-Ethernet (PoE)
10.
Be capable of transmitting analog NTSC video for setup and
installation purposes
11.
Be capable of storing images on-camera via SDHC storage
B.
Camera shall be capable of the following adjustments and features: